Conestoga College Logo - Home Page

Electrical Techniques

Credential:
Ontario College Certificate
College Code:
CONS
School:
Trades & Apprenticeship
Program Code:
1327
Accelerated Delivery:
Yes
Campus:
ING, WA
Academic Year:
2016 / 2017

About the Program

The Electrical Techniques program is offered over 30 weeks within two semesters. This is a full-time program with a combination of theoretical and practical instruction including safety training. In addition to providing extensive theory and hands-on training pertaining to the electrical industry, it also provides foundation skills for acceptance into either the Electrical Technician - Industrial (co-op or non-co-op programs), or the Powerline Technician program. This program will be delivered through a combination of theory (60%) and labs/shop hands-on work (40%).

For more information please contact our Student Recruitment staff at trades@conestogac.on.ca.

Program Information

Length: One-year Ontario College Certificate program
Delivery Sequence:
         Ingersoll - September/2016 (Open) - Fall | Winter
         Waterloo - January/2017 (Open) - Winter | Spring/Summer
Location: Waterloo and Ingersoll
Start: September (Ingersoll), January (Waterloo)
First-Year Capacity: 32 (Waterloo), 24 (Ingersoll)

Admission Requirements

Admission Procedures

Program Requirements

Tuition & Fees

Tuition fee details for the 2016-2017 year are listed below. Books and supplies are additional.

Domestic Fees

Estimated fees based upon the previous academic year (2015 / 2016) for Electrical Techniques - Program # 1327

Ingersoll - Fall 2016 Level 1 & 2 (Program Start: 2016-09-06)
Description Fall 2016 Winter 2017
Full-time Program Tuition $1420.00 $1420.00
Student Priority Fee $49.45 $49.45
Graduation/Alumni Services Fee $27.80 $27.80
Administration Fee $25.30 $25.30
Technology Enhancement Fee $133.35 $133.35
CSI Association Fee $30.00 $30.00
CSI - CSA $4.56 $4.56
CSI Health Plan Fee $286.00 $0.00
Session Total $1976.46 $1690.46
Year Total   $3666.92
Waterloo - Winter 2017 Level 1 & 2 (Program Start: 2017-01-09)
Description Winter 2017 Spring 2017
Full-time Program Tuition $1420.00 $1420.00
Student Priority Fee $49.45 $49.45
Graduation/Alumni Services Fee $27.80 $27.80
Administration Fee $25.30 $25.30
Technology Enhancement Fee $133.35 $133.35
CSI Association Fee $82.50 $82.50
CSI - CSA $4.56 $4.56
CSI Health Plan Fee $191.62 $0.00
Session Total $1934.58 $1742.96
Year Total   $3677.54
Waterloo - Spring 2016 Level 2 (Program Start: 2016-01-05)
Description Spring 2016
Full-time Program Tuition $1379.00
Student Priority Fee $49.00
Graduation/Alumni Services Fee $27.55
Administration Fee $25.05
Technology Enhancement Fee $126.40
CSI Association Fee $67.50
CSI - CSA $4.56
CSI Health Plan Fee $0.00
Session Total $1679.06
Year Total $3597.52

International Fees

Estimated International fees based upon the previous academic year (2015 / 2016) for
Electrical Techniques - Program # 1327


Ingersoll - Fall 2016 Level 1 & 2 (Program Start: 2016-09-06)
Description Fall 2016 Winter 2017
International Program Tuition $5850.00 $5850.00
Student Priority Fee $49.45 $49.45
Graduation/Alumni Services Fee $27.80 $27.80
Administration Fee $25.30 $25.30
Technology Enhancement Fee $133.35 $133.35
CSI Association Fee $30.00 $30.00
CSI - CSA $4.56 $4.56
ISR $375.00 $375.00
International Health Fee $550.00 $0.00
Session Total $7045.46 $6495.46
Year Total   $13540.92

Waterloo - Winter 2017 Level 1 & 2 (Program Start: 2017-01-09)
Description Winter 2017 Spring 2017
International Program Tuition $5850.00 $5850.00
Student Priority Fee $49.45 $49.45
Graduation/Alumni Services Fee $27.80 $27.80
Administration Fee $25.30 $25.30
Technology Enhancement Fee $133.35 $133.35
CSI Association Fee $82.50 $82.50
CSI - CSA $4.56 $4.56
ISR $375.00 $375.00
International Health Fee $401.50 $0.00
Session Total $6949.46 $6547.96
Year Total   $13497.42

Waterloo - Spring 2016 Level 2 (Program Start: 2016-01-05)
Description Spring 2016
International Program Tuition $5750.00
Student Priority Fee $49.00
Graduation/Alumni Services Fee $27.55
Administration Fee $25.05
Technology Enhancement Fee $126.40
CSI Association Fee $67.50
CSI - CSA $4.56
ISR $375.00
International Health Fee $0.00
Session Total $6425.06
Year Total $13251.62

Financial Assistance

The Ontario Student Assistance Program (OSAP) is a needs-based program designed to help Ontario students cover the cost of post-secondary education. Funded by the federal and provincial governments, OSAP is intended to promote equality of opportunity for post-secondary studies through direct financial assistance for educational costs and living expenses. These interest-free loans are intended to supplement your financial resources and those of your family. The majority of students apply for loan assistance via the OSAP website. Students can also print the application booklet through the OSAP website.

For more information, please visit Financial Services/Awards.

Graduate Opportunities

Graduates of this program are well prepared to enter directly into an apprenticeship, or other employment in the electrical field, or to continue on into related diploma programs.

For more details on related occupations, job market information and career opportunities, see the Government of Canada website: http://www.workingincanada.gc.ca

Pathways & Credit Transfer

Conestoga pathways enable students to build on their academic achievements in order to earn a degree or additional credential. Pathways are formed through agreements between Conestoga programs or partner institutions.

Often applicants have earned credits from another college or university that may allow a student to be granted advanced standing or exemption. Learn more about credit transfer opportunities at Conestoga.

Prior Learning Assessment and Recognition (PLAR)

Conestoga recognizes prior learning of skills, knowledge or competencies that have been acquired through employment, formal and informal education, non-formal learning or other life experiences. Prior learning must be measurable at the required academic level and meet Conestoga standards of achievement for current courses. Challenge exams and portfolio development are the primary methods of assessment. Other methods of assessment may be available depending upon the nature of the course objectives. Successful completion of the assessment results in an official course credit that will be recorded on the student's Conestoga transcript. PLAR cannot be used by registered Conestoga students for the clearance of academic deficiencies, to improve grades or to obtain admission into a program.

Learn more about PLAR.

Program Courses

Course Details
Course Code Course Title and Description
Level 1
COMM1085 College Reading & Writing Skills

Description: This course focuses on the reading, writing and critical thinking skills needed for academic and workplace success. Students will analyse, summarize, and discuss a variety of readings and apply the steps of planning, writing, and revising in response to written prompts. This course prepares students for post-secondary writing tasks, research, and documentation.
Hours: 45
Credits: 3
Pre-Requisites:
CoRequisites:

DRWG1285 Prints and Standards - Residential

Description: This course provides the student with skills necessary to read construction and electrical drawings with confidence and accuracy. The student will study: the alphabet of lines, metric and imperial scales and how to convert between them, information from architectural and structural and mechanical drawings and their application to electrical installations, general and specific project specifications, panel schematics, and material take-offs for a single dwelling.
Hours: 45
Credits: 3
Pre-Requisites:
CoRequisites:

ELEC1700 Electrical Fundamentals I

Description: This course is a comprehensive overview of electrical fundamentals, electron theory, voltage, current, and resistance. Students will also study electrical and mechanical energy. The student will solve calculations for series, parallel, and combination DC circuits using Ohm's and Kirchoff's Laws. An introduction to magnetism and its relationship to EMF are also covered.
Hours: 60
Credits: 4
Pre-Requisites:
CoRequisites:

ELEC1710 Installation - Residential

Description: This course will introduce the student to the processes, procedures and applications involved in the install of typical equipment and associated wiring found in residential construction. The student will bend and install various raceways, develop schematic circuits and lay-out diagrams. The students will learn how to ensure the installations conform to the C.E.C. and what professional trade practices are required to meet the government safety regulations, manufacturer's recommendations and approved industry standards.
Hours: 90
Credits: 5
Pre-Requisites:
CoRequisites:

ELEC1720 Instrumentation Fundamentals

Description: Students will study common terms and fundamental applications of Instrumentation and Process Control Systems. Students will work with the SI and Imperial System of measurement and use various types of meters, scales and sensors. Examination of instrumentation symbols is also covered, as well as basic process control and instrumentation diagrams for pressure and temperature devices, etc.
Hours: 45
Credits: 3
Pre-Requisites:
CoRequisites:

MATH1670 Basic Math for Trades

Description: This course will enable students to improve their mathematical required for the trades. This course will enable students to strengthen their mathematical skills in numeracy, measurement and data analysis, algebra, and geometry.
Hours: 30
Credits: 2
Pre-Requisites:
CoRequisites:

Level 2
COMP1020 Computer Applications

Description: This introductory course will enable the learner to effectively use P.C. based software.
The learner will use Windows commands to manipulate files.
The learner will communicate using word processing, spreadsheet and presentation software, and combinations of the three to prepare effective documentation.
Hours: 45
Credits: 3
Pre-Requisites:
CoRequisites:

DRWG1295 Prints and Standards - ICI

Description: In this course, the student will examine and interpret the Rules and Regulations of the C.E.C. as they pertain to electrical installation. The topics covered include: general requirements of the C.E.C., calculating conductor ampacity, including free air (both above and underground installations), grounding and bonding, wiring methods, Class 1 and 2 circuits, wiring in residential occupancies, residential service calculations, wiring for pools and temporary installations as well as industrial and commercial applications.
Hours: 45
Credits: 3
Pre-Requisites:
CoRequisites:

ELEC1730 Electrical Fundamentals II

Description: This course examines magnetism including associated laws and calculations. The theories of magnetism are then applied to gain an understanding of both DC machines and AC induction motors. The fundamentals of AC theory are also covered from the development of a sine wave to current and voltage relationship in resistive, inductive and capacitive circuits.
Hours: 60
Credits: 4
Pre-Requisites:
CoRequisites:

ELEC1740 Signal and Control Circuits

Description: This practical course calls upon the student to develop, connect, and troubleshoot various types of building systems such as intrusion, automation, and communication systems, with an emphasis on fire alarms and associated equipment and theory of operation.
Hours: 90
Credits: 5
Pre-Requisites:
CoRequisites:

ELEC1750 Electronics

Description: In this course, the student will cover the fundamental principle of operation of diodes, transistors, truth tables for logic gates, numbering systems, semiconductor materials, as well as analyze circuits connected in series and/or parallel configurations.
Hours: 45
Credits: 3
Pre-Requisites:
CoRequisites:

ELEC1760 Installation - Industrial

Description: This hands-on course focuses on various DC, single phase AC, and 3-phase AC motors and controls. The student will connect, test, and develop diagrams for various equipment and motor circuits.
Hours: 45
Credits: 2
Pre-Requisites:
CoRequisites:

Program Outcomes

Program Advisory Committees

The College appoints Program Advisory Committee members for diploma, degree, certificate and apprenticeship programs. Committees are composed of employers, practitioners and recent program graduates. College representatives (students, faculty, and administrators) are resource persons. Each committee advises the Board on the development of new programs, the monitoring of existing programs and community acceptance of programs.

For a list of the current members, please visit our Program Advisory Committees.

Apply Now

Domestic students should apply online at www.ontariocolleges.ca or by phone at 1-888-892-2228.

ONTARIOCOLLEGES.CA
60 Corporate Court
Guelph, Ontario
Canada N1G 5J3

Detailed steps on the application process may help you to apply.

International students should apply online using a Conestoga College International Application Form. Please note: not all programs are open to international students. Interested students should check the listing of open programs on our international students web page before applying.
For program information, call the Information Centre at 519-748-5220 ext 3656.

Disclaimer

The College reserves the right to alter information including requirements and fees and to cancel at any time a program, course, or program major or option; to change the location and/or term in which a program or course is offered; to change the program curriculum as necessary to meet current competencies in the job market or for budgetary reasons; or to withdraw an offer of admission both prior to and after its acceptance by an applicant or student because of insufficient applications or registrations, over-acceptance of offers of admission, budgetary constraints, or for other such reasons. In the event the College exercises such a right, the College’s sole liability will be the return of monies paid by the applicant or student to the College.

Students actively registered in cohort delivered programs who take longer than the designed program length of time to complete their studies are accountable for completing any new or additional courses that may result due to changes in the program of study. Unless otherwise stated, students registered in non-cohort delivered programs must complete the program of study within seven years of being admitted to the program.

PROGRAM SEARCH

Program Status
Start DateCampusStatus**
SEP, 2016 Ingersoll Open
JAN, 2017-AD * Waterloo Open
* AD = Accelerated Delivery
** Status applicable to domestic students

Videos

Trades and Apprenticeship at Conestoga College video
More videos

Success Stories

Back To Top