Bachelor of Engineering - Power Systems Engineering

2022/23 | Conestoga College

Program Code: 1458C
Engineering & Technology

Conestoga College Institute of Technology and Advanced Learning

This is a companion document to the current Conestoga College Student Guide

COVID-19 and Academic Program Delivery

​In response to the COVID-19 pandemic, Conestoga academic plans and decisions will continue to evolve to reflect the advice of public health authorities. ​Please consult the COVID-19 Information page for the most up-to-date information on college protocols.

Expectations regarding course delivery, participation, and assessments will be communicated by your faculty member at the start of the semester and included in the instructional plan.

Program technology requirements are posted on the program web page. Students in hybrid delivery courses will require a device, webcam functionality, and reliable Internet access. 

Program Handbook Guidelines

​The purpose of this handbook is to provide students with program-specific details and other important information. The material in this handbook is accurate at the date of posting and is applicable for the current academic year. Students will be informed of handbook changes that occur, if any, through college email. Program handbooks are updated yearly, and students must check their program handbook for the current edition.

This handbook must be read in conjunction with general information about Conestoga College found on the website and in the Student Guide. The information in the Student Guide and on the college website​ applies to all students, regardless of program.

The Student Guide provides details regarding Student ServicesSafety and SecurityStudent Rights and Responsibilities and more. 

Welcome

​Welcome to the School of Engineering & Technology​.

Conestoga College offers a full range of engineering and technology programs to suit your interests and career aspirations. Within these, there are one-year certificates (both foundational and post-diploma), two and three-year diplomas, and four-year bachelor's degree programs. Pathways exist within these programs to empower students to reach their full potential.

All of our programs incorporate active learning that may include project-based learning, co-operative education, case studies, and capstone projects. Active learning allows students to apply theory to practice during their studies and results in a graduate who is better prepared for the real work world. Employers like our approach to learning and student development, which is why the School of Engineering & Technology has a history of excellent graduate and co-op placement rates.

Sincerely,​

Tony Thoma, MBA, P.Eng.
Executive Dean

Program Staff Contact Information

Program Administration and Faculty

Executive Dean – Engineering–Technology–Trades
Tony Thoma, MBA, P.Eng.
A2205-4 - Cambridge Campus
519-748-5220 ext. 3212
tthoma@conestogac.on.ca

Executive Assistant to Executive Dean:
Rebecca Dougherty​
A2205 – Cambridge Campus
519-748-5220 ext. 4573
rdougherty@conestogac.on.ca

Program Chair
Rafik Guindi, Ph.D., P.Eng.
A2205-8 - Cambridge Campus
519-748-5220 ext. 4618
rguindi@conestogac.on.ca

Administrative Assistant to Program Chair
Jennifer Larsen
A2205 – Cambridge Campus
519-748-5220 ext. 4606
jlarsen@conestogac.on.ca

Program Technician
Samual Butella
A2129 - Cambridge Campus
519-748-5220 ext. 4534
sbutella@conestogac.on.ca

Program Coordinator
​Bobby Al-wazedi, Ph.D., P.Eng.
Cambridge Campus
ial-wazedi@conestogac.on.ca 

Faculty
Francois Coutu, P.Eng.
A3229 - Cambridge Campus

Other Faculty

In addition to the core complement of your full-time program faculty, other faculty will work with you during this academic program. These include faculty from other Schools for the breadth and or/general education courses, as well as faculty with particular expertise in specific focus areas.

Contact information for each faculty will typically be provided on the first day of related courses.

​​Communication - School Standard

Conestoga College and eConestoga student email accounts are used to communicate with students.  Students are expected to regularly check their student email accounts.  Faculty and staff will not respond to emails from non-Conestoga email addresses.​

ONE Card - Student Identification Card

Conestoga's ONE Card is the College's official identification card for students. Before you can be fully registered and access your timetable, you must upload a student photo.  Your ONE Card student photo completes your student record, confirms that you are a Conestoga College student, and gives you access to student services. When your ONE Card student photo has been uploaded and approved, your card will be mailed to you. ​​Learn more about using your ONE Card here. If you have any questions, please email the ONE Card Office.​

Program Overview

​Program Description

The Bachelor of Engineering - Power Systems Engineering program (PSE) will be a Canadian Engineering Accreditation Board (CEAB)-accredited engineering program, allowing students to start on the path to becoming a professional engineer. It is a unique project-based co-op program that allows students to apply the high level of theory they learn to interesting, real-world projects. It is geared to motivated individuals looking for challenging careers in the dynamic and fast-paced world of electrical power engineering, trans-disciplinary engineering of renewable energy generation, and smart-grid and energy conservation technologies.

As a Project-Based Learning (PBL) program, projects form the main and dominant component of the PSE curriculum. The material studied is determined by the demands of a series of projects each with a different focus. As students progress, they will gradually develop and build on the theoretical knowledge and practical skills required to succeed and advance in power systems generation, transmission, and distribution.

Program Outcomes

Program outcomes are developed with the expectations and requirements of external regulatory/accrediting bodies and consultation with Program Advisory Committees (PACs) and related industry experts.  These outcomes are coordinated and articulated in a manner designed to result in the achievement of sets of specified learning attributes.

Program Outcomes are located on the Power Systems Engineering program webpage on the left side navigation bar.

Program Design

Students can find their program design on the Student Portal by following the steps below:

  1. Log in to Student Portal
  2. Click on 'My Courses' tab
  3. Select 'View Progress Report' button

Courses are listed by level/semester. Students can also view courses for the most current program design for this academic year on the Conestoga College website. To find these courses, students need to scroll down the page to the 'Program Courses'.

Accreditation

The engineering curriculum is required to ensure a foundation in mathematics and natural science, a broad preparation in engineering science and design, and an exposure to non-technical complementary studies. The quality and balance of a program is assessed using a tally of Accreditation Units (AUs) as defined by CEAB. Bachelor of Engineering programs are designed to ensure students receive more than the minimum curriculum components required for accreditation.

Every accredited engineering program in Canada is regularly assessed by CEAB to ensure that its graduates are academically qualified to begin the process to be licensed as a professional engineer. There are four major criteria for a program review:

  1. graduate attributes
  2. continual improvement
  3. student related policies and support systems
  4. quality curriculum

Graduate attributes ensure that a graduating engineering student is technically prepared with the knowledge and skills required to work as a professional engineer. They also ensure that graduates are prepared for the professional responsibilities required of an engineer, and that they are employable. Students in Bachelor of Engineering programs are regularly required to demonstrate these attributes in the series of projects they complete each semester.

As part of the continual improvement process, feedback is regularly gathered from Bachelor of Engineering program stakeholders, including students. This feedback is reviewed at the end of each semester and academic year to ensure both student success and academic and operational quality.

As documented in the rest of this Program Handbook, both Conestoga and the Bachelor of Engineering programs have numerous policies, procedures, and support services in place. Students are made aware of these during Orientation activities.

Degree Minors

Conestoga College's degree students may be able to apply their interdisciplinary electives toward a minor within their degree program. A minor acknowledges additional learning within a specific discipline that a student achieves while completing their degree. A minor can help recognize the additional interests a student may have and can help differentiate a job seeker from their competitors. Successful completion of a minor will be identified on the student's official transcript.

For more information, please click here: https://www.conestogac.on.ca/electives/degree/minors

Program Academic Achievement

​Academic Promotion Decisions

Refer to the College website 'Baccalaureate Degree Promotion and Graduation Policy' for specific information regarding this policy.

These policies are defined to meet the requirements of the Post-secondary Education Quality Assessment Board (PEQAB).  Should the Board revise its requirements these College policies will be reviewed. In addition, changes may result due to decisions made by Academic Forum.  Any changes will be reflected in this web document.​

Academic Decisions

The Academic Team meets at the conclusion of every semester, and at the call of the Program Coordinator, to make academic decisions.  Academic decisions are made with respect to promotion, probation, learning contracts, supplemental work and discontinuance.

The academic record of students who fail to meet program/course standards will be reviewed by the Academic Team.  This would include the following reasons:

  • Failure of theory course and/or studio course
  • Patterns of absences from class or co-op which may affect achieving program standard

A student who has not met the program/course standards will be subject to one, or a combination of, the following as determined by the Academic Team:​

  1. Complete supplemental work relating to specific course failures.
  2. Repeat the course at the earliest opportunity.
  3. Repeat the entire semester/year.
  4. Be placed on probationary status.
  5. Enter into a Learning Contract relating to achievement across more than one program course.
  6. Be declared ineligible to participate in co-op terms.​ 
  7. Be discontinued from the program.

Students who are promoted but have un-cleared failures may not be able to take courses for which the failed course is a prerequisite.

A grade of 60% (2.0-grade points) is considered the minimum level of achievement for passing a course, however, students must maintain a minimum program GPA of 2.5 (65%) to avoid probation, repeating the same level or discontinuance. This means that achieving 60% in a few courses will be okay however many courses with final marks of 60% will result in an overall GPA of less than 2.5.

Students actively registered in cohort delivered programs who take longer than the designed program length of time to complete their studies are accountable for completing any new or additional courses that may result due to changes in the program of study. Unless otherwise stated, students registered in non-cohort delivered programs must complete the program of study within seven years of being admitted to the program.​


Pre-requisites

Students may be allowed entry into a course for which they are missing a prerequisite only in special circumstances with the permission of the program coordinator and with the approval in writing of the course Professor. In addition to prerequisites and co-requisites, it may not be possible to take courses out of sequence to preserve the links between courses and curriculum projects at any level.

Incomplete Work

A student will only be granted an incomplete in a given course if the following conditions are met:

  1. The student has accumulated a grade of at least 50%
  2. The student is not in a position to be discontinued (as specified in the official promotion policy for degree programs)
  3. The student has passed the theory portion of the course (if applicable).
  4. The student has not had any academic offences reported in the given course. 

​​​Clearance of Academic Deficiency

Supplemental

During a student's academic career, there may be occasions when the student's performance results in a failing grade for a course.  Conestoga grants students the opportunity to raise this grade to the minimum passing grade under very specific circumstances (i.e. eligibility criteria) outlined within the Clearance of Academic Deficiency Policy and Procedure.   In addition to the eligibility criteria outlined in the policy, the PSE academic team has identified the following criteria in accordance with Conestoga's policies and procedures.  A student will only be granted a supplemental in a given subject area if the following conditions are met:

  1. The student has accumulated a grade of at least 50%.
  2. At least one of the examinations in the course must have been passed.  For courses without examinations, the course professor will select the evaluation that students must have passed.
  3. The student is not in a position to be discontinued (as specified in the official promotion policy for degree programs). 
  4. The student has not passed the theory portion of the course. 
  5. The student has not had any academic offences reported in the given course. 
  6. The student is allowed no more than two supplementals per term and no more than eight over the course of the program. 
  7. The student has not previously had a supplemental in the course.

Failures

A course that has been failed will be considered un-cleared until the student receives a passing grade for it.  A previously failed course or module must be cleared through one of the following methods (as defined by the professor):​

  1. Repeat the course or module
  2. Take a supplemental examination
  3. Enter into and complete a learning contract

If a student successfully passes a previously failed course through either a supplemental examination or a learning contract, the previously awarded grade for the course will be changed to 60%. If a student repeats a course or module, the grade earned on the repeated course will be recorded and used to calculate cumulative average and Grade Point.

Probation

A student with a program GPA between 2.0 and 2.5 and two (2) or fewer failures will be placed on academic probation. Failures must be cleared and the student's GPA must be raised in order to return to normal academic status. Students on academic probation are eligible to continue in the program with academic conditions as defined by the pre-requisite and co-requisites for the program and to apply for co-op placements as long as they meet the academic requirements specified in Co-operative Education Eligibility.

Discontinuance

Students will be discontinued if:

  1. There is no progress in clearing missing courses and maintaining a 2.5 GPA while on probation.
  2. They have failed the same course three (3) times.
  3. They are carrying more than four (4) core subject failures and their GPA is between 1.0 and 2.0.
  4. They have a GPA that is below 1.0 (Average below 50%).
  5. They have had 3 academic offences and/or a student responsibility violation necessitating discontinuance.

Normally there will be no academic decision made at the end of level one. However, a student may be discontinued at the end of level one based on a unanimous recommendation of the program's Academic Promotion Committee.

Appeal

A student who wishes to appeal an academic decision, probation, or discontinuance from the program should refer to the Conestoga College Student Guide.

Re-admission

Students that have been discontinued from the program may apply to be re-admitted subject to the following requirements:

  • Re-admission will not be granted sooner than one year after the discontinuance decision.
  • S​tudent must complete one of the following academic upgrading activities during the one-year absence from the program:
    • ​Successful completion of two full-time semesters (minimum of five courses per semester) in one of Conestoga College's electronic engineering technology diploma programs (Computer Engineering Technology or Electronics Engineering Technology) with no final grade less than 65% in individual courses. It is the applicant's responsibility to identify appropriate engineering technology programs if not attending one of the above-mentioned Conestoga College programs.
    • Re-take all failed courses. 
    • If the discontinuance was solely the result of failing the same course three (3) times then all failed courses must be cleared within a year.
  • ​​All re-admitted students will be on academic probation for one year after their re-admission. Performance will be assessed under the probation requirements.
  • Students are permitted only one re-admission into the program.

Graduation

Students are eligible to graduate upon completion of all academic requirements in their program of study.  For students enrolled in co-op programs, this includes completion of all mandatory co-op work terms. Students are expected to respond to their invitation through their Student Portal. Convocation ceremonies are held in the spring and fall of each academic year. Students, who take longer than the advertised program length, are responsible for completing any new or additional courses due to a program design change. Students who complete their program after the scheduled completion date are required to fill out an Application to Graduate form and submit it with payment to the Registrar's Office. Students who are discontinued or have withdrawn and then return to the college will be placed in the current program design and must meet all requirements to graduate.


Withdrawal

Students considering withdrawing from a program should meet with their Program Coordinator/Academic Advisor prior to withdrawing. To formally withdraw from a program, the student must complete the Withdrawal form located in the Student Portal under the "Services" tab. Click the "My Forms" to locate, complete, and submit the form to the Registrar's Office. Deadlines for withdrawing from a program with/without an academic penalty or with/without a refund are posted on the website under Academic Dates.

Program Information


Academic Dates

It is the student's responsibility to be aware of various important academic dates throughout the year. These academic dates are posted on the college website.

Please note that Continuing Education courses and Apprenticeship programs may have different start dates and exam dates for courses. 

​Course Changes (Adding/Dropping)

Students can find their program design on the Student Portal by following the steps below:

  1. Log in to Student Portal.
  2. Click on 'My Courses' tab.
  3. Scroll over the icons to the right of individual course listings.
It is strongly recommended that students consult the Student Sucess Advisor/Program Coordinator prior to dropping a course.   Adding/dropping courses may affect a student's status, financial aid entitlement and may be limited by other factors.  

  • If a course withdrawal is processed prior to the deadline date, a dropped course will be recorded as a "W" (withdrawal) on the transcript.
  • If a course withdrawal is processed after the deadline, an "F" (fail) will be recorded on the transcript.
Students may add/drop courses through the Student Portal when timetables are available.  If a student is unable to make a course change(s) in the Student Portal, they can submit a Course Change Request Form which can be found in the Student Portal, under the "Services" tab, "My Forms" button.  

Continuing Education and OntarioLearn courses are not included in student full-time fees. Students wishing to take these part-time courses are required to pay the full fee for the individual course(s). Students may add these or other courses under the 'Browse Continuing Education' tab in their Student Portal.

Co-operative Education

The academic requirements to be eligible for a co-op work term in a degree program are as follows (starting with the 1701 cohort and subsequent unless otherwise noted):

  • Minimum 65% session weighted average in the eligibility term two academic semesters prior to any co-op work term.
  • Maximum two failures or withdrawals during the academic semester that occurs in the eligibility term two academic semesters prior to any co-op work term.
  • Must have successfully completed all but two core courses, according to the program design, by the eligibility term prior to any given work term (regardless of the level the student was placed in advanced standing).
  • Students (even those on special timetables) will not be permitted to complete a co-op work term until conditions above are met and all but two core course deficiencies, according to the program design, are cleared.
  • Co-op work terms may need to be re-sequenced to allow academic deficiencies to be cleared or in the event a student changes cohorts (i.e. graduation is delayed by one year or more). Students may not repeat a passed work term.
  • Should a student's academic performance decline considerably (including cumulative missed courses) during the term just prior to any work term, the college reserves the right to withdraw the student from the upcoming work term.
  • In the case of back to back work terms eligibility to participate in consecutive work terms will be granted upon approval to participate in the initial work term.
  • Where two or more work terms occur back to back, should a student fail to achieve academic eligibility for the first work term, their eligibility for the second work term will be based on the term that occurs two terms prior to the second work term.
  • Students in degree programs may only fail/defer each work term in their program design once. 
To participate in a co-op work term, students must (starting with the 1701 cohort and subsequent unless othewise noted):
  • Successfully complete the Co-op and Career Preparation modules (CEPR/CDEV71050).  Students who fail Co-op and Career Preparation will not be permitted to search for co-op employment nor will they be able to participate in a co-op work term.  Students who fail Co-op and Career Preparation more than twice will not be permitted to continue in their co-op program (exceptions may be granted for degrees).
  • Be enrolled full-time (full-time = 70% of the hours, or 66 2/3 % of the courses in the current session/level of the Program Design.)  Exceptions will apply to those students who have been granted special timetabling based on formal identification of barriers or challenges for which accommodation is required. Academic eligibility requirements must still be met prior to being granted access to seek a co-op work term.
  • Must have successfully completed all but two core courses, according to the program design, by the eligibility term prior to any given work term (regardless of the level the student was placed in advanced standing).
  • Students (even those on special timetables) will not be permitted to complete a co-op work term until conditions above are met and all but two core course deficiencies, according to the program design, are cleared.
  • Co-op work terms may need to be re-sequenced to allow academic deficiencies to be cleared or in the event a student changes cohorts (i.e. graduation is delayed by one year or more). Students may not repeat a passed work term.
  • Should a student's academic performance decline considerably (including cumulative missed courses) during the term just prior to any work term, the college reserves the right to withdraw the student from the upcoming work term.
  • Meet program-specific co-op work term eligibility requirements.
The following rules apply to back-to-back work terms: 
  • Eligibility to participate in consecutive work terms will be granted upon approval to participate in the initial work term. 
  • Should a student fail to achieve academic eligibility for the first work term, their eligibility for the second work term will be based on the term that occurs two terms prior to the second work term. 
For additional information please refer to the Co-operative Education Regulations & Guidelines: Student Regulations, Procedures and Supports found by:
  • Login to MyCareer
  • Select Co-op
  • Select Co-op Resources
  • Select Co-op Policies
  • Select Co-operative Education Regulations, Procedures and Supports for Students
Please Note:
  • Co-op programs add value to your education. Earn money while you apply what you've learned in a real workplace environment.  Visit Co-operative Education for more information. 
  • The College cannot guarantee co-op employment.  All co-op students are required to conduct an independent co-op job search in addition to the supports and services provided by the Department of Co-op Education.
  • Students are responsible for their own transportation and associated costs in order to complete work term requirements. Work locations may not always be readily accessible by public transportation.
  • Students who are not eligible for co-op or​ do not secure the first work term by the start of the work term semester will be offered the option to enrol in the 15 credit Career Management in Canada GCM70000 co-op alternative.  This co-op alternative involves guided activities involving approximately 3 hours of time per week and additional project work.
  • If GCM70000 is selected, students cannot transfer back into the co-op stream and cannot complete a co-op term for their first work term.
  • GCM70000 is delivered online.
  • GCM70000 is only an alternative for the first co-op work term of the program, students will still complete at least one mandatory co-op work term if they choose GCM70000.



Credit Transfer, Pathways & PLAR

Conestoga recognizes you may have formal post-secondary education that may allow you to enter a program at an advanced level or provide for individual course exemptions. To ensure your credits are eligible for transfer, please contact our Credit Transfer Office at: credittransfer@conestogac.on.ca. 

The Credit Transfer Policy and Procedure are available on the college website.

For more information, visit the Credit Transfer webpage and the PLAR webpage.

If you are currently a Conestoga student and want to continue studying at Conestoga, there are a number of different pathway opportunities available to you.

Whether you wish to transfer to another program or apply to a new program after graduation, Conestoga has established pathways, to help you meet your goals.

Conestoga College has articulation agreements with many domestic and international institutions. These agreements allow students to transfer into a specific program with advanced standing. Students must meet the academic requirements stated in the agreement.

For more information regarding pathways at Conestoga, contact the Credit Transfer Officer at 519-748-5220 ext. 2166.

Resources

PSE Support Staff

The Technologist in the PSE Support Staff Office is there to support the Power Systems Engineering degree program. They are a valuable resource for both faculty and students. To keep things moving smoothly, identify what is needed before going, fill out the required sign-out forms properly, and return all items promptly. Remember 'Poor planning on your part does not constitute an emergency for anyone else!'​

What is Academic Integrity?

Having academic integrity means acting fairly and honestly when engaging in academic activities. 

By having and applying an Academic  Offences Policy and Procedure, Conestoga ensures graduates complete their studies fairly and honestly through hard work and dedication, and thus are well-prepared for their future careers.

Copyright at Conestoga 

Conestoga facilitates access to print, media, and electronic resources to support and enrich learning, teaching, and research in compliance with the following:

Plagiarism

Plagiarism is submitting or presenting work of another person(s)/organization in whole or substantial part as one's own without proper citation and referencing.

​Evaluations (deadlines, tests, and examinations)

General Information

The program and course/module learning outcomes provide the frame of reference for evaluation.  Learning experiences are planned in order that the student can demonstrate the ability to correlate theory with practice.​

Evaluation is a continuous process that assesses student performance.

Regular appointments may be arranged between the student and faculty at which time the student's progress is reviewed, and advisement is given for improved student learning.

Evaluation Methods​

In-School Semesters:

A variety of tools are used for evaluation including:

  • quizzes, written tests, and examinations
  • oral presentations and demonstrations
  • written assignments, such as books reports, case studies, business plans, journals, logs, portfolios
  • design and/or construction of projects
  • lab assignments

Co-op Semesters:

Co-op assignments must be completed competently and within the allocated time unless other arrangements have been made with the faculty/Co-op advisor.

Sources of Evaluation and Feedback

Students will benefit from the input of many people who will evaluate their work and provide feedback.  The final grade is a compilation from many sources including:

  • evaluation by course faculty of the student's performance (team and individual)
  • external review panels
  • self-evaluations
  • peer evaluations
  • business associates (CO-OP experience, thesis external advisors, etc.)

Results of Evaluation

Faculty maintains their own student tracking records.  You and your academic team should review these records on a regular basis.

Late Submission of Student Work

Student work submitted after the due date/time, and without accepted extenuating circumstances, may be graded by faculty but the mark will be progressively reduced as follows:

Within 24 hours of the due date/time – mark reduced by 10%

Within 48 hours of the due date/time – mark reduced by 20%

The above timeframes for late submission will be applied in relation to business days, excluding weekends and statutory holidays. Without a request for extension of submission approved by relevant course faculty (refer to Extension of Submission of Student Work below), student work submitted after that window may be marked as "missed" and valued at zero toward the final grade. 

This is a faculty decision made in consultation with the student.

Extension of Submission of Student Work

It is acknowledged that events can happen to either faculty or students that disrupt the planned schedule.  Each incident will be addressed on an individual, case-by-case basis by course faculty, with the following general guidelines:

  • Students are required to submit all assignments on or before the date specified and should anticipate problems that might necessitate an extension of time. If an extension of time is required, students will make this request to the appropriate faculty.
  • An extension of time will be given only if arrangements have been made with the faculty prior to the due date. Requests for an extension must be made by email to the relevant course faculty, from the student's Conestoga e-mail address. Extensions will not typically be given if the request is made the day the assignment(s) is due.
  • In general, extensions for submission of student work will be considered only in the case of extenuating circumstances (illness, accidents, bereavement, etc.). Course faculty may require documentation of the proposed extenuating circumstances – such as a doctor's note in the case of illness; the decision to accept this documentation is determined by the faculty responsible for the related work.
  • Where a student has requested an extension and provided relevant faculty with accepted documentation of extenuating circumstances in advance of due dates or with a medical certificate upon return to classes, efforts will be made to accommodate the student without penalty and within the timeframe set by the College for completion of term work.

Guidelines for Writing Tests and Exams

  • Students are required to bring their college ID cards to tests and exams
  • The faculty/invigilator may request that books, bags, coats, caps, etc. be left in a designated area
  • The faculty/invigilator has the authority to assign seats
  • Students must wait until so directed before turning over and starting their test or exam
  • Students are not permitted to talk after the test or exam has started, except to the faculty/invigilator
  • Students may not enter the exam/test room after 30 minutes past the start nor leave the room before 30 minutes has passed after the start of the test or exam
  • The deferment of a test, assignment or exam may be granted at the discretion of individual course faculty where the student has:
    • made the request to the relevant faculty prior to the date of the originally scheduled evaluation, and
    • ​​has provided faculty with acceptable documentation of the circumstances generating the request.

Provided the above conditions have been met, efforts will be made to accommodate the student requests for deferment without penalty and within the timeframe set by the College for completion of term work.​


​​Program Transfer

Prior to transferring to another program, it is recommended that the student meets with the program coordinator or academic advisor. Students who decide to change programs may do so by completing and submitting a Program Application Form to the Registrar's Office. If considering transferring to a program outside the school in which they are currently enrolled, students ​may want to discuss options with a Career Advisor. When a student moves from one Conestoga program to another and where course numbers/codes are identical or equivalent, automatic credit is given if passing grades are met. Additional information for career or academic advising is available from faculty, program coordinators, or career advisors in the Welcome Centre.​​​

Student Engagement

Program Advisory Committees (PACs)

Program Advisory Committees (PACs) provide the necessary link between Conestoga and the community it serves. PACs operate in an advisory capacity to Conestoga administration with the objective to keep Conestoga responsive to current and future workforce needs, trends or opportunities in industry and the marketplace.

All post-secondary education programs of study at Conestoga, both full-time and part-time, which lead to an employment related credential, or are approved by the Ministry of Colleges and Universities (MCU), will be associated with a PAC, with the exception of apprenticeship and pre-apprenticeship programs. For any program not leading to an employment related credential, such as foundation programs, PACs are optional.

At the beginning of each year, the coordinator(s) of the program will ask for student volunteers. The coordinator(s) will select which student(s) will represent the program at PAC. Student attendees are important members of the PAC and are expected to be present at all meetings and are responsible for preparing and submitting a report based on guidelines provided by the program coordinator.

Students who participate in PACs will receive credit on their Co-Curricular Record (CCR) . Your CCR is an official document, complementary to your academic transcript, which recognizes and records learning that you have achieved through approved Co-curricular experiences at Conestoga.

​​Student Feedback

​Student feedback is an essential component of our continuous improvement process. Our opportunities for student feedback include:

Key Performance Indicators

All college programs in the province are evaluated using Key Performance Indicators (KPIs) through the Ministry of Colleges and Universities (MCU). This Student Experience Survey is conducted each academic year in select classes. Strategic goals to improve the programs are developed from these results. This data and other data specific to the campus and the program/school are collected so that Conestoga College can continually improve quality.

Student Appraisal of Teaching (SAT)

The Student Appraisal of Teaching (SAT) allows direct feedback from students on teaching for a particular course. Completion of the SAT forms give teachers and academic managers valuable information to use for the improvement of teaching at Conestoga.

The SAT process has two components: the Early Course Check-in and Full-SAT. The Early Course Check-in is 5 questions, occurs during week 10 of classes and provides early feedback to faculty about the student experience within their classroom. The Full-SAT is 43 questions and occurs late in the semester; a summary of the results goes to the faculty member and their academic manager. Typically, about one-quarter of the faculty is appraised per term. All full-time faculty have a SAT review at least once every two years. Part-time faculty may be reviewed more frequently. Continuing Education students may have an opportunity to complete a SAT form during their Continuing Education course.

Academic Delivery Plan and College Hours

​​​Academic Delivery Plan Fall 2022

In response to the COVID-19 pandemic, Conestoga has developed an academic delivery plan for the Fall 2022 semester. The safety and well-being of our college community remains our highest priority. Our academic plans and decisions continue to be based on the advice of public health authorities. 

Back on campus

We look forward to continuing to welcome students back in person and on campus for the fall term. There are three ways in which programs will be delivered:

Hybrid: You will be required to attend in-person classes at your assigned campus. Most class hours will be delivered in person, with a few hours delivered remote/online.

On campus: You will be required to attend in-person classes at your assigned campus. All class hours will be delivered in person.

Remote: Remote programs will be delivered fully online. There will be no in-person classes.

Details regarding classes and delivery formats will be provided in your program schedule (timetable).

College Hours

Full-time courses at Conestoga are typically delivered Monday to Saturday, 8:00 a.m. to 10:00 p.m. *

*In some instances, classes will be scheduled outside of this time frame and may include Sunday, to accommodate course, program and college requirements.*​​

Facility Information

After Hours Access

Conestoga hours of operation are 7:00 a.m. to 11:00 p.m. Conestoga recognizes that in some programs of study, students may require after-hours access to classrooms and labs. After-hours access is maintained in accordance with the academic needs of individual programs. The after-hours access is a privilege, not a right.

If after-hours access is required, faculty must contact security in advance, with the student(s) name, ID number, and program information, along with signed paperwork approving access. The student must follow these guidelines: 

  • Be in the designated room with another approved person
  • Inform security immediately of any out-of-the normal situations
  • Have student identification card available
  • Notify security upon departure
  • Not move furniture

Refer to the Student Guide for more information.

​PSE Teaching Lab​

General Rules

The PSE Teaching Lab will be used occasionally for teaching and learning. This lab is well equipped and must be adequately maintained.  Students are required to follow all safety and protocols, rules and restrictions, and Personal Protective Equipment requirements communicated by faculty, staff, and building signage.  The following general rules have been established to ensure it is kept that way

  • Equipment is not to be removed from the lab
  • Students must conduct themselves in a professional manner at all times
  • For safety reasons, two students must be present in the lab outside regular college hours (8 a.m. to 6 p.m.)
  • Proper safety equipment, including eyewear, must be worn when working at your lab bench or in the manufacturing facilities
  • There shall be no eating or drinking at any of the lab benches
  • There shall be no eating in the teaching lab
  • There shall be no microwaves or cooking in the lab at any time
  • When possible, all food, food wrappers, and food containers should be discarded in a garbage bin outside the room
  • There shall be no games loaded onto or played on the lab computers
  • The video display unit and front computer are for faculty use only
  • All screen savers must be professional
  • Use of digital devices (ex. phones, tablets, computers, etc.) during class is restricted to program-related activities​

Equipment

No equipment is to be removed from the lab for any reason. Each lab is assigned the required equipment. Mention any concerns or problems to your professor.

Equipment that does not function properly should be brought to the attention of your professor. He or she will fill out the appropriate repair tag and assign an alternate piece of equipment for you to use. If the professor is unavailable, fill out the repair tag yourself describing the problem in as much detail as you can. If the equipment does not get tagged, it will not get fixed! Under no circumstance is a student allowed to remove the cover from any computer or piece of lab equipment. All lab equipment is specially marked and is traceable by the police.​

After Hours Access for PSE Teaching Labs

There are times when students may require access to the lab outside of the scheduled time. Access may be permitted with approval from the appropriate stakeholders. Students will be required to gain approval and follow campus access protocols.  The lab must have two or more students present at all times. If one of the students is female, there must be three students present in the lab at all times. It is the students' responsibility to close and lock the lab door when leaving.​

Lab Deposits

A lab deposit may be required when signing out program specialized program parts or equipment. This deposit is refunded when a student leaves the college assuming that all borrowed parts and equipment are returned. Anything that is not returned will be charged against the lab deposit. Any costs over and above the deposit will be charged to the student.

Safety Information

 

Personal Protective Equipment (PPE)

Students are required to comply with additional PPE requirements and safety measures that may be communicated by faculty, building signage, and or college staff. All students are required to follow the PPE requirements specified for each lab, shop and or other campus space. Other rules may be set by supervisory faculty/staff in shops and labs.

Refer to your Student Guide for Conestoga's Safety and Security services and procedures.

 

College-wide Policies and Procedures

​​Student Protection Acknowledgement

A Student Protection Acknowledgement confirmation pop-up will appear when a student logs into the Student Portal on a yearly basis. This will direct students to policies and procedures relevant to their academic responsibilities. All Conestoga College wide academic policies and procedures are listed on the college website under "About Conestoga", "Policies and Procedures". 

Students are advised to review and comply with all policies and procedures, including the following:         
  • Academic Dispute and Resolution Policy & Procedure
  • Academic Offences Policy & Procedure ​
  • Clearance of Academic Deficiency Policy & Procedure
  • Convocation Procedure
  • Co-operative Education Policy
  • Discontinuance Procedure
  • Evaluation of Student Learning Policy & Procedure
  • Grading Procedure
  • Program and Course Withdrawal and Refund Procedure/International Student Withdrawal and Refund Procedure
  • Readmission Procedure
  • Religious Holiday Policy & Procedure
  • Student Expectations for Online Engagement
  • Student Feedback Policy
  • Student Fees Policy & Student Fee Invoicing and Payment Procedure
  • Student Rights and Responsibilities Policy & Procedure

Students must follow all of the policies and procedures for Conestoga College and it is expected that faculty will accept, fulfil and enforce these standards.​​ 

Conestoga 101

The Student Engagement Department is here to help you transition to the Conestoga College experience, connect with your community, and build your skills. 

Start your college experience by completing Conestoga 101 (CON0101) on eConestoga, a mandatory course for all new full-time students that will take you approximately one hour to complete. CON0101 provides an overview of the supports, services, and opportunities available to you throughout your time at Conestoga. Make sure you complete it early on in the term, as it contains valuable information that will help you transition to Conestoga.

Interdisciplinary Electives

Students are required to complete interdisciplinary elective courses. Interdisciplinary elective requirements are listed at the bottom of the progress report, which is found on the Student Portal under My Courses. The progress report indicates the level/semester in which the course must be taken. Students are responsible for adding interdisciplinary electives into their schedule for the designated semester. Eligible courses are posted each semester by the School of Interdisciplinary Studies on the College's elective website. For more information and to view the current elective course offerings, visit https://www.conestogac.on.ca/electives/degree. Questions regarding interdisciplinary electives can be directed to the School of Interdisciplinary Studies: genedfaq@conestogac.on.ca.

Web-based Tools

​Program courses may use web-based services with data centres outside of Canada. Students may be expected to complete assessments where information is transmitted outside of Canada. Students who do not wish to submit their information to other countries have the right to opt-out. It is the responsibility of the student to notify the instructor if they, in the first week of term or at the time assignment details are provided, wish to submit an alternate assignment.

Course examinations may be administered through a remote proctoring service to assure academic integrity. Ensure that you meet the system requirements that will allow the recording of your computer screen, webcam, and microphone.

Attendance at Evaluations

Working Together to Plan Your Success

Your success matters! As an emerging professional, it is important that you demonstrate the same professional attitude to your program that you will be required to demonstrate to your future workplace. Regular, punctual attendance, and active participation in scheduled classes, field and clinical placements, labs and any on-campus and off-campus activities scheduled by your program will help you to understand and master the learning complexities of your program.
If extenuating, unplanned circumstances require you to miss a class, please note that it is your responsibility to follow up with individual faculty members and to acquire any missed information.

Attendance for Evaluations

Evaluations are critical components of each course and your overall success in your program. An evaluation is defined as a test, exam, presentation or any other formal assessment that contributes to your course mark that requires your presence, in class or on-line. Please note that in many programs across the College, every field placement, clinical day, and lab/shop day is considered crucial to your overall learning and success and the expectation is that you attend.  If you are in a program that includes field or clinical placements, labs/shops, or any other on or off campus activities, it is essential that you discuss attendance requirements with your program faculty in order to understand expectations and consequences.

Your attendance for all evaluations is a requirement. If there is a concerning pattern of absence from evaluations across your program, you may be asked to meet with the Program Coordinator and/or Student Advisor to discuss strategies for success.

While circumstances such as religious holidays and academic accommodations may necessitate rescheduling of evaluations and will be accommodated, please note that there will be no special arrangements made for rescheduling evaluations due to personal conflicts such as work or vacation plans.  

In order to facilitate a smooth implementation for all scheduled evaluations, both you and your program faculty have responsibilities which are listed below:

Faculty Responsibilities

  • To communicate all course obligations to you at the beginning of each semester through the Instructional Plan, including evaluation and presentation dates.
  • To communicate, in writing, any unplanned extenuating circumstances involving the college, the program or the faculty members that may require changes to the course schedule.
  • To provide alternative evaluation arrangements for missed evaluations/work due to recognized religious holidays as defined by the College Employer Council and documented accommodations through the Accessibility Office.
  • To accept alternative evaluation requests in good faith and examine based on the unique circumstances and students' individual needs.
  • To facilitate alternative evaluation arrangements as described below.

Student Responsibilities

  • To be informed about all course obligations and due dates.
  • To inform your faculty member in writing of the need to reschedule evaluations due to a religious holiday as defined by the College Employer Council.
  • If you have to be absent from any scheduled evaluation, report your absence on the Student Portal using the procedure below. You must do this prior to the start of the evaluation or risk receiving a mark of zero.

How to Report Absences on the Student Portal

  1. Log into the Student Portal and click on the 'Absence tab'.
  2. Indicate whether or not there is an assessment scheduled on that day by clicking 'Yes or No', as well as the reason for the absence (illness or other).
  3. Click 'Continue' to report the absence.
  4. Click 'I agree' to confirm the absence.
  5. You will receive a confirmation email that your absence has been recorded.

Important! Please note the following:

  • The earliest you can record an absence for a particular day, is after 8:00 p.m. the day before. You must report each day you are absent.
  • The Absence Recording System will show you as being absent for the day, starting from the time that you recorded the absence. For example, if you record your absence on a specific day at 11:00 a.m., the system will show you as being absent for all classes starting after 11:00 a.m. that day.
  • If you are going to be present for any other classes on the day for which you recorded an absence, please let the faculty member know by attending or following up by eConestoga or college email.
  • When you return to campus, make eConestoga or email contact immediately with the faculty member associated with the evaluation you missed in order to arrange appropriate follow up.

Valid Absence from Scheduled Evaluations

Conestoga recognizes that unexpected circumstances, such as brief illness, do arise during the term. As a visit to a health practitioner may not be necessary or possible, we do not ask you to provide a doctor's note except in exceptional circumstances. If you are absent from a scheduled evaluation, you must:                  

A. Report the Absence on the Student Portal prior to scheduled class time: See the Student Responsibilities section above.    

B. Make Alternative Evaluation Arrangements 

i. Reach out to your professor to ask how the evaluation will be made up. Your professor will determine alternative evaluation arrangements as appropriate.  

If the evaluation cannot be rescheduled, (for example it is an experiential activity, lab, or a group presentation) your professor may allocate its marks to another evaluation item. This will be communicated to you by email to your eConestoga or college account OR discussed and documented in an interview and then signed off by both you and your professor.

Program Handbook Revision Log

​Date: June 2022
Type of Revision: Annual Updates​

Date: July 2021
Type of Revision: Annual Updates

Date: July 2020
Type of Revision: Annual Updates

Date: July 2019
Type of Revision: Content Migration 

Accommodation Disclaimer

​Conestoga College provides an equitable environment where all students have the opportunity to participate in College life. In accordance with the Accessibility for Ontarians with Disabilities Act (AODA) and the Ontario Human Rights Code, Conestoga recognizes its responsibility and legal obligation to provide education, information and services in an accessible manner.

Conestoga's Accessible Learning services provide support for students with permanent and temporary disabilities who feel they are encountering barriers to learning. They work with students to understand the impact of a disability in the college environment and will help develop a success plan that considers student goals and required academic accommodations. Accessible Learning will also communicate necessary accommodations to professors on behalf of the student. 

To consult with an Accessibility Advisor about accommodations please make an appointment by emailing accessibility@conestogac.on.ca or calling 519-748-5220 ext. 3232.

Exceptions for non-accessibility focused issues need to be consulted on with your professor. Final approval for exceptions unrelated to academic accommodations rests with the program chair.

Bachelor of Engineering - Power Systems Engineering