Welding Techniques
- Credential:
- Ontario College Certificate
- College Code:
- CONS
- School:
- Engineering & Technology
- Program Code:
- 1193
- Accelerated Delivery:
- No
- Campus:
- CA
- Academic Year:
- 2021/ 2022
Notice:
To effectively participate in remote learning, students in this program must have reliable Internet access and meet these device requirements.
About the Program
Students in this unique 30-week program will receive a thorough hands-on and theoretical education in the welding field, preparing them for a successful career in this industry. This program follows the curriculum of the provincial trades Welder (456A) and Metal Fabricator - Fitter (437A) and successful students will be provided the opportunity to challenge provincial exemption exams for Level 1 of the in-school training providing them with a headstart into an apprenticeship. This practical education is complemented with courses in computer applications, computer-aided design (CAD), and technical communications.At the state-of-the-art Cambridge campus, students will have the opportunity to develop welding skills using modern equipment with the common arc welding processes such as Shielded Metal Arc Welding (SMAW or 'stick'), Gas Metal Arc Welding (GMAW or 'MIG'), Flux Cored Arc Welding (FCAW), and Gas Tungsten Arc Welding (GTAW or 'TIG').
For more information contact the Program Coordinator at welding@conestogac.on.ca.
Program Information
Length: One-year Ontario College Certificate programDelivery Sequence: Cambridge - September/2021 - Fall | Winter
Location: Cambridge - Fountain Street
Start: September
First-Year Capacity: 40
Admission Requirements
- Ontario Secondary School Diploma (OSSD), or equivalent, or 19 years of age or older with mature student status (See Mature Student definition for details.)
- Grade 12 compulsory English, C or U, or equivalent, OR Conestoga College Preparatory Communications (COMM1250)
- Grade 11 Mathematics, C, M (U/C), or U, or equivalent, OR Conestoga College Preparatory Mathematics for Trades (MATH1420)
- Minimum cumulative average (English & Math) 60%
- For more information on preparatory programs, visit Academic Upgrading
Note re: Admission Requirements
- Grade 11 or 12 Physics and/or Technological Design or Conestoga College Preparatory Physics, technical shops/labs, technical drafting, electricity, electronics and basic computer literacy are desirable but not mandatory.
Admission Procedures
- An academic strength is calculated by averaging the submitted marks of required subjects. If more than one mark is received for a required subject, the highest mark will be used in the calculation.
- Ten (10) additional marks are added to each Advanced level, OAC, U, U/C, and post-secondary course used in the calculation of academic strength.
- A sound mathematical and English background is important for success in this program and is considered during the admission selection process. Minimum cutoffs apply.
Program Requirements
- Applicants are required to have basic computer literacy.
- Conestoga College is accredited by the Canadian Welding Bureau as a Welder Test Centre to conduct welder qualification tests in accordance with CSA Standard W47.1. Graduating students will be given the opportunity to complete these practical tests at a discounted rate.
- Upon completion of the program, students graduating with a minimum grade of 70% in all courses are eligible to write the Level 1 apprenticeship exemption exam. Successful completion of these exams will exempt the student from Level 1 of the in-school training for the Welder (456A) or the Metal Fabricator-Fitter (437A) apprenticeship trades.
Tuition & Fees
Tuition fee details for the 2020-2021 year are listed below. Fees for the next academic year are unavailable at this time. Books and supplies are additional.
Estimated fees based upon the previous academic year (2020 / 2021) for Welding Techniques - Program # 1193
| Description | Fall 2020 | Winter 2021 |
|---|---|---|
| Full-time Program Tuition | $1348.00 | $1348.00 |
| Recreation/Athletics Fee | $0.00 | $0.00 |
| Graduation/Alumni Services Fee | $20.95 | $20.95 |
| Administration Fee | $18.40 | $18.40 |
| Technology Enhancement Fee | $142.75 | $142.75 |
| Capital Development Fee | $77.08 | $77.08 |
| CSI Association Fee | $84.50 | $84.50 |
| CSI Health Plan Fee | $295.00 | $0.00 |
| ONE Card Fee | $12.75 | $12.75 |
| CSI Legal Protection (optional) | $30.00 | $0.00 |
| CSI Advocacy Fee | $0.00 | $0.00 |
| CSI Event Fee and Campus Life (optional) | $15.00 | $15.00 |
| CSI Student Clubs and Societies (optional) | $3.50 | $3.50 |
| Locker Fee | $0.00 | $0.00 |
| Alumni Services | $0.00 | $0.00 |
| Student Spaces | $0.00 | $0.00 |
| Graduation fee | $0.00 | $0.00 |
| Academic Support Fee | $0.00 | $0.00 |
| CSI Academic Support Fee | $0.00 | $0.00 |
| Health and Wellness Fee | $0.00 | $0.00 |
| CSI Health and Wellness Fee | $0.00 | $0.00 |
| Career Services Fee | $0.00 | $0.00 |
| CSI Career Services Fee | $0.00 | $0.00 |
| Sustainability Fee (optional) | $5.00 | $5.00 |
| Student Services | $50.65 | $50.65 |
| CSI - Student Frosh Kit Fee (optional) | $0.00 | $0.00 |
| Session Total | $2103.58 | $1778.58 |
| Year Total | $3882.16 |
International Fees
Estimated International fees based upon the previous academic year (2020 / 2021) for
Welding Techniques - Program # 1193
| Description | Fall 2020 | Winter 2021 |
|---|---|---|
| International Program Tuition | $6250.00 | $6250.00 |
| Recreation/Athletics Fee | $0.00 | $0.00 |
| Graduation/Alumni Services Fee | $20.95 | $20.95 |
| Administration Fee | $18.40 | $18.40 |
| Technology Enhancement Fee | $142.75 | $142.75 |
| Capital Development Fee | $77.08 | $77.08 |
| CSI Association Fee | $84.50 | $84.50 |
| CSI Health Plan Fee | $295.00 | $0.00 |
| ISR | $375.00 | $375.00 |
| ONE Card Fee | $12.75 | $12.75 |
| CSI Legal Protection (optional) | $30.00 | $0.00 |
| CSI International Health Fee | $500.00 | $0.00 |
| CSI Advocacy Fee | $0.00 | $0.00 |
| CSI Event Fee and Campus Life (optional) | $15.00 | $15.00 |
| CSI Student Clubs and Societies (optional) | $3.50 | $3.50 |
| Locker Fee | $0.00 | $0.00 |
| Alumni Services | $0.00 | $0.00 |
| Student Spaces | $0.00 | $0.00 |
| Graduation fee | $0.00 | $0.00 |
| Academic Support Fee | $0.00 | $0.00 |
| CSI Academic Support Fee | $0.00 | $0.00 |
| Health and Wellness Fee | $0.00 | $0.00 |
| CSI Health and Wellness Fee | $0.00 | $0.00 |
| Career Services Fee | $0.00 | $0.00 |
| CSI Career Services Fee | $0.00 | $0.00 |
| Sustainability Fee (optional) | $5.00 | $5.00 |
| Student Services | $50.65 | $50.65 |
| CSI - Student Frosh Kit Fee (optional) | $0.00 | $0.00 |
| Session Total | $7880.58 | $7055.58 |
| Year Total | $14936.16 |
Financial Assistance
The Ontario Student Assistance Program (OSAP) is a needs-based program designed to help Ontario students cover the cost of post-secondary education. Funded by the federal and provincial governments, OSAP is intended to promote equality of opportunity for post-secondary studies through direct financial assistance for educational costs and living expenses. These interest-free loans are intended to supplement your financial resources and those of your family. The majority of students apply for loan assistance via the OSAP website. Students can also print the application booklet through the OSAP website.For more information, please visit Financial Services/Awards.
Graduate Opportunities
Graduates of this program will be well-suited to enter the welding and fabrication industry as qualified welders and may also seek opportunities to become an apprentice in several related ‘Red-Seal' trades such as Welder (456A), Metal Fabricator - Fitter (437A), Construction Boilermaker (428A), or Ironworker (420A). Graduates will also be eligible to resume their studies with advanced standing by directly entering Year 2 of a welding diploma program including Welding & Fabrication Technician, Manufacturing Engineering Technology - Welding & Robotics* or Welding Engineering Technology Inspection*.* A minimum grade of 70% in MATH1455 and MATH1485 is required for advanced standing in these engineering technology programs.
On average, 86% of graduates from the last three years (2017 to 2019) found employment within six months of graduation.
For more details on related occupations, job market information and career opportunities, see the Government of Canada website: https://www.jobbank.gc.ca/home
Pathways & Credit Transfer
Conestoga pathways enable students to build on their academic achievements in order to earn a degree or additional credential. Pathways are formed through agreements between Conestoga programs or partner institutions.Often applicants have earned credits from another college or university that may allow a student to be granted advanced standing or exemption. Learn more about credit transfer opportunities at Conestoga.
Prior Learning Assessment and Recognition (PLAR)
Conestoga recognizes prior learning of skills, knowledge or competencies that have been acquired through employment, formal and informal education, non-formal learning or other life experiences. Prior learning must be measurable at the required academic level and meet Conestoga standards of achievement. Challenge exams and portfolio development are the primary methods of assessment. Other methods of assessment may be available depending upon the nature of the course objectives. PLAR cannot be used by registered Conestoga students for the clearance of academic deficiencies, to improve grades or to obtain admission into a program.Learn more about PLAR.
Program Courses
| Course Code | Course Title and Description |
|---|---|
| Level 1 | |
| COMP1723 | Computer Applications
Description: This introductory course will enable the students to effectively use PC-based software used in industry and the Learning Management System (LMS) at Conestoga College. The students will explore the D2L system be able to use course shells' content. In addition, basic to intermediate Microsoft Windows topics are covered, to view, download, and manipulate files. Microsoft Office programs for email, word processing, spreadsheets and presentation are used for effective communication and preparation of documentation. |
| CON0101 | Conestoga 101
Description: This self-directed course focuses on introducing new students to the supports, services, and opportunities available at Conestoga College. By the end of this course, students will understand the academic expectations of the Conestoga learning environment, as well as the supports available to ensure their academic success. Students will also be able to identify on-campus services that support their health and wellness, and explore ways to get actively involved in the Conestoga community through co-curricular learning opportunities. |
| DRWG1497 | Engineering Drawing Interpretation
Description: This course is designed to introduce the student to the basic principles and concepts of technical drawings. Emphasis will be placed on basic drafting in orthographic projections, sections, dimensioning and tolerancing, notes, specifications, and welding symbols to prepare the student for the interpretation of welded fabrication engineering drawings. |
| MATH1455 | Trade Calculations I
Description: This course is an applications oriented mathematics course in which the student utilizes basic mathematical operations including addition, subtraction, multiplication and division of whole numbers, decimals and fractions. In addition, students will use both the imperial and System International when solving problems in linear measurement, area, volume and mass. This course is designed to develop a proficiency in mathematics necessary for subsequent courses in Metal Fabrication and Welding Technology. |
| WELD1360 | Welding Process Theory I
Description: This theoretical course will begin with an introduction to welding, health and safety issues, welding history and applications. The next topics will introduce the principles and applications of the shielded metal arc welding (SMAW) process and gas metal arc welding (GMAW) process fundamentals. |
| WELD1645 | Shielded Metal Arc Welding I
Description: This course will develop basic welding skills with the Shielded Metal Arc Welding (SMAW) process, commonly referred to as "stick" welding. Techniques will be developed for producing fillet welds in all welding positions while groove welds will be produced in the flat, horizontal and vertical positions with a variety of electrode types. |
| WELD1655 | Semi-Automatic Welding I
Description: This course will develop basic welding skills with the Gas Metal Arc Welding (GMAW) process (commonly referred to as "MIG" welding). Techniques will be developed for producing fillet welds in all welding positions while groove welds will be produced in the flat, horizontal and vertical positions. |
| WELD1660 | Thermal Cutting and Brazing
Description: In this course, the student will be introduced to the safe set-up and use of thermal cutting processes for the cutting, piercing, beveling and gouging of various metals. Theoretical study and hands-on practice will stress safety and quality using oxy-fuel cutting, welding and brazing, plasma arc cutting, and air-carbon arc cutting and gouging processes. |
| Level 2 | |
| COMM1085 | College Reading & Writing Skills
Description: This course focuses on the reading, writing and critical thinking skills needed for academic and workplace success. Students will analyse, summarize, and discuss a variety of readings and apply the steps of planning, writing, and revising in response to written prompts. This course prepares students for post-secondary writing tasks, research, and documentation. |
| DRWG1855 | CAD for Fabrication Technology
Description: In this course the student will be introduced to computer-aided drafting (CAD) and create piece part and assembly drawings of welded fabrications. The application of welding symbols and the writing of Bills of Materials will also be included in the course. |
| MATH1485 | Trade Calculations II
Description: This course is a follow-up to Technical Calculations I, furthering the student's ability to solve trade-related mathematical problems utilizing algebra and trigonometry. The course is designed to enhance problem solving skills. In this course, students will be provided with a practical working knowledge in solving trade-related mathematical problems. The course covers both vocational (job oriented) and generic skills (written, analytical and problem-solving). |
| WELD1670 | Welding Processes Theory II
Description: This theoretical course will introduce the principles and applications of the major welding processes, including gas metal arc welding (GMAW), metal cored arc welding (MCAW), flux cored arc welding (FCAW) as well as the gas tungsten arc welding process (GTAW). In addition, the student will be introduced to the basic filler metals and shielding gases used with these major welding processes. |
| WELD1680 | Shielded Metal Arc Welding II
Description: This course will further develop Shielded Metal Arc Welding (SMAW) skills with additional practice making fillet and groove welds in all positions. Welding qualification tests will be practiced on groove weld assemblies with backing bars, followed by bend testing to assess quality. |
| WELD1695 | Semi-Automatic Welding II
Description: This course will further develop Gas Metal Arc Welding (GMAW) skills and introduce the Flux Cored Arc Welding (FCAW) and Metal Cored Arc Welding (MCAW) processes. Students will have additional practice making fillet and groove welds in the flat, horizontal and vertical positions. Welding qualification tests will be practiced on groove weld assemblies with backing bars, followed by bend testing to assess quality. |
| WELD1700 | Welding Quality and Inspection
Description: Welding quality will be studied from a perspective of defect identification and reviewing cause, effect and corrective actions for various defects. In addition, causes and control methods for warpage and distortion in welded fabrication will also be reviewed. |
| WELD1715 | Gas Tungsten Arc Welding
Description: This course will develop basic welding skills with the GTAW process, commonly referred to as "TIG" welding. Techniques will be developed for producing fillet and groove welds in the flat, horizontal and vertical positions on both mild steel and aluminum materials. |
| WELD1950 | Introduction to Metal Fabrication
Description: This course is designed to introduce the student to the concepts of basic metal fabrication methods and principles. Emphasis will be placed on safety and on the proper selection, use and care of hand measuring and power tools. In addition, the student will be operating metal fabrication machines including plate shears, drilling machines, and the press brake |
Program Outcomes
- Demonstrate the set-up and safe operation of welding and fabricating processes and equipment including a working knowledge of Health and Safety legislation, lock-out procedures, hazard control, personal protective equipment, and WHMIS related information.
- Demonstrate the set-up, application, and troubleshooting of modern industrial welding and related processes including Shielded metal Arc (SMAW), Gas Metal Arc (GMAW), Flux Cored Arc (FCAW), and Gas Tungsten Arc (GTAW), Oxy-Fuel Cutting (OFC) and Plasma Arc Cutting (PAC).
- Describe the theory of operation, applications, materials selection and trouble-shooting of the standard welding and fabrication process and equipment.
- Select, plan, and demonstrate metal fabrication operations including measuring, layout, cutting, forming and fitting for weldment manufacturing using industrial metal fabrication machinery including plate rolls, shears, iron-worker, and press brakes.
- Prepare welding documentation and develop a familiarity with the common welding codes and standards in the welding industry (i.e. ASME and CSA).
- Explain the application of standard inspection and testing methods used to assess the quality of welds and welded fabrications.
- Identify common metals, alloys, and classification systems and select the appropriate welding and fabricating techniques and consumables for adapting to the characteristics of the different types.
- Perform mathematical calculations related to the applications of welding and fabrication technology, layout, and measurement.
- Interpret engineering drawings, welding symbols, bills of material and create piece-part and assembly drawings using CAD software.
- Develop computer application skills to solve technical problems in the following areas: operating system and file management, technical document creation, spreadsheets, online searching and communication.
- Communicate information effectively to individuals and groups by applying communication principles and by preparing both formal and informal reports.
Program Advisory Committees
The College appoints Program Advisory Committee members for diploma, degree, certificate and apprenticeship programs. Committees are composed of employers, practitioners and recent program graduates. College representatives (students, faculty, and administrators) are resource persons. Each committee advises the Board on the development of new programs, the monitoring of existing programs and community acceptance of programs.For a list of the current members, please visit our Program Advisory Committees.
Program Handbook
Apply Now
Domestic students should apply online at www.ontariocolleges.ca or by phone at 1-888-892-2228. OntarioColleges.ca 60 Corporate Court Guelph, Ontario Canada N1G 5J3. Detailed steps on the application process may help you to apply.International students should apply online using the Ontario Colleges.ca International applicant portal. Please note that not all programs are open to international students; check the list of open programs on our International Student Programs web page before applying.
Disclaimer
The College reserves the right to alter information including requirements and fees and to cancel at any time a program, course, or program major or option; to change the location and/or term in which a program or course is offered; to change the program curriculum as necessary to meet current competencies in the job market or for budgetary reasons; or to withdraw an offer of admission both prior to and after its acceptance by an applicant or student because of insufficient applications or registrations, over-acceptance of offers of admission, budgetary constraints, or for other such reasons. In the event the College exercises such a right, the College’s sole liability will be the return of monies paid by the applicant or student to the College.
Students actively registered in cohort delivered programs who take longer than the designed program length of time to complete their studies are accountable for completing any new or additional courses that may result due to changes in the program of study. Unless otherwise stated, students registered in non-cohort delivered programs must complete the program of study within seven years of being admitted to the program.
| Start Date | Campus | Status** |
|---|---|---|
| SEP, 2021 | Cambridge - Fountain | Open |
Program status for international students
Success Stories
-
Conestoga students supported by national welding awardFive Conestoga students and recent graduates were among the eight recipients of awards announced by...
-
Facility management students present final projectsFourth-year students in Conestoga’s Bachelor of Applied Technology - Architecture - Project...
-
Student projects support city urban planning initiativeStudents in Conestoga’s Bachelor of Applied Technology - Architecture - Project and Facility...
-
3D printers support community PPE programConestoga’s School of Engineering & Technology has been working to help support...