Applying as a Canadian applicant
Domestic students should apply online or by phone at 1-888-892-2228.
Applying as an International applicant
Campus tours
Campus tours are one of the best ways to experience Conestoga. During this time, we are offering online guided tours to show you all Conestoga has to offer.
Book your tourVirtual tours
If you can't make an on-campus tour or attend one of our events, the virtual tour is a great way to visit us.
View our Virtual tourCourses - September 2024
Level 1
Course details
Principles of Architectural Graphics and Design
ARCH1100
This course introduces the student to the architectural graphic conventions employed in the production of design and construction drawings and discusses the student's role of the Designer in society. It leads the student through the process of understanding construction drawings, design problem solving, effective development and communication of a design idea, and recognition the built environment has on society. As a vehicle of learning, various drawing exercises as well as a small scale residential oriented architectural design problem will be the focus.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Building Information Modeling I
ARCH1185
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Statics
CIVL1080
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Conestoga 101
CON0101
- Hours: 1
- Credits: 0
- Pre-Requisites:
- CoRequisites:
Construction Materials I
CONS1860
The course is an introduction to some of the basic materials and techniques that are used in the construction of buildings. There is also a strong construction site safety component. Students will learn about earthworks, concrete, masonry & steel and will be introduced to foundation and shoring systems, beams, columns, and floor systems.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Mathematics I
MATH1085
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Surveying I
SURV1020
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Level 2
Course details
Construction Drawings (Residential)
ARCH2035
In this course the student is introduced to light wood frame construction by exploring construction techniques for a single family residential house. Each student will produce a partial set of Construction Drawings for a single family house from a specific presentation design provided.
- Hours: 56
- Credits: 4
- Pre-Requisites: ARCH1100 AND ARCH1185
- CoRequisites:
Building Information Modeling II
ARCH2105
- Hours: 42
- Credits: 3
- Pre-Requisites: ARCH1185
- CoRequisites:
Mechanics of Materials
CIVL2135
This course introduces the concept of mechanical stress and strain in materials. Students utilize the theory of mechanics to determine the stress and strain caused by load, failure capacities and deformations of axially loaded structural elements and bending members. The mechanical behaviour of materials, material failure mechanisms and structural stability are explored with consideration of Limit States Design.
- Hours: 42
- Credits: 3
- Pre-Requisites: CIVL1080 OR CIVL1110 OR PHYS1041
- CoRequisites:
Building Code I
CODE1130
This course introduces students to the Laws and Regulations governing the construction of buildings in Ontario. Students will explore the legal requirements contained in the Building Code Act as well as the intent, organization, and application of the Ontario Building Code. Emphasis is given to the roles and responsibilities of design and construction professionals as well as understanding the building permit process (application requirements, plan review and site inspections). The course will also introduce students to the technical construction and energy efficiency requirements in the Ontario Building Code for new houses (Parts 9 and 12 of Division B). Students will become competent in the use and application of the Ontario Building Code by analyzing house drawings for code compliance.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
College Reading & Writing Skills
COMM1085
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Construction Materials II
CONS1870
The course is a continuation of Construction Materials 1. Students will continue to be introduced to basic materials and more advanced techniques that are used in the construction of buildings. The focus is on advanced footing systems, concrete, structural steel, masonry, wall cladding, low slope roofing, openings, fire & sound separations.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Mathematics II (Construction)
MATH1140
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Level 3
Course details
Construction Drawings (Small Commercial)
ARCH1030
- Hours: 42
- Credits: 3
- Pre-Requisites: ARCH2030 OR ARCH2035
- CoRequisites:
Architectural Design I
ARCH2040
- Hours: 42
- Credits: 3
- Pre-Requisites: ARCH1100 AND ARCH1185
- CoRequisites: ARCH1030
Structural Design (Steel)
CIVL2200
- Hours: 42
- Credits: 3
- Pre-Requisites: CIVL1080 OR CIVL1110 AND CIVL2130 OR CIVL2135
- CoRequisites:
Building Code II
CODE2050
This course focuses on the technical construction and energy efficiency requirements in the Ontario Building Code for new small commercial buildings (Parts 9 and 12 of Division B). Students will be introduced to principles of fire and life safety commonly incorporated into single and multi-use commercial buildings. Emphasis is given to passive fire protection, spatial separation, egress and exiting in buildings. This course will also introduce students to mezzanine, health/washroom, and barrier-free requirements that are applicable to both small and large buildings. Students will become competent in the use and application of the Ontario Building Code by analyzing small commercial drawings for code compliance.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Building Science
CONS1175
This course explores concepts in physics utilized in the construction industry and introduces the student into the field of Building Sciences. The student is further introduced to specific studies of the building enclosure, psychrometrics, heat transfer, fire, and sound and building science . These topics form the basis for later technical study in the program. Emphasis is placed on integrating the knowledge of physical scientific concepts with their application to practical construction problems and to applicable building code requirements.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Building Services I
CONS2040
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Estimating I
CONS2050
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Level 4
Course details
Construction Drawings (Multi-Use)
ARCH2050
This course is designed to familiarize the student with the nature of light industrial construction utilizing a structural steel skeleton with an insulated steel wall assembly. The student will take the design developed in the Architectural Design I course and develop the building systems and details required to construct the building on a specific site. The student will organize this information and present it in clear and concise manner in the form of a set of construction drawings.
- Hours: 42
- Credits: 3
- Pre-Requisites: ARCH1030 AND ARCH2040
- CoRequisites:
Building Information Modeling III
ARCH2120
This course will enhance the student’s knowledge of Building Information Modeling by introducing more advanced modeling techniques including the creation and management of component families, advanced schedules, shared parameters, and solid modeling. In addition, the student will explore the design and placement of mechanical and electrical systems in a 3-dimensional building model.
- Hours: 42
- Credits: 3
- Pre-Requisites: ARCH1185
- CoRequisites:
Structural Design (Concrete)
CIVL2190
- Hours: 56
- Credits: 4
- Pre-Requisites: CIVL1080 OR CIVL1110 AND CIVL2130 OR CIVL2135
- CoRequisites:
Building Code III
CODE2060
This course focuses on the technical construction and energy efficiency requirements in the Ontario Building Code for new large commercial and multi-residential buildings (Parts 3 and 12 of Division B). Students will be introduced to the unique and challenging fire and life safety concerns found in larger, taller, and more complex buildings. Emphasis is given to advanced active fire protection systems such as fire alarms, automatic sprinkler systems, standpipe systems, and smoke control systems. This course will also introduce students to the technical requirements for a change of use or renovation in an existing building (Parts 10 and 11 of Division B). Students will become competent in the use and application of the Ontario Building Code by analyzing large multi-residential drawings and renovation drawings for code compliance.
- Hours: 56
- Credits: 4
- Pre-Requisites: CODE2050
- CoRequisites:
Building Services II
CONS2030
- Hours: 42
- Credits: 3
- Pre-Requisites: CONS2040
- CoRequisites:
Estimating II
CONS3020
This course builds upon skills learned in Estimating I.
The student will participate as a team member, while using Bluebeam and Excel software to complete a detailed cost estimate for masonry and rough carpentry work, relevant to a commercial building project.
Students will apply pricing for material, labour & equipment, specific to masonry and rough carpentry work product.
Students will learn to manipulate units of material pricing and to develop labour unit pricing.
- Hours: 28
- Credits: 2
- Pre-Requisites: CONS2050
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 5
Course details
Construction Drawings (Detailing and Analysis)
ARCH3020
- Hours: 42
- Credits: 3
- Pre-Requisites: ARCH2050
- CoRequisites:
Architectural Team Design
ARCH3035
- Hours: 56
- Credits: 4
- Pre-Requisites: ARCH1185 AND ARCH2040 AND ARCH2050
- CoRequisites: ARCH3020
Building Performance Studies
ARCH3050
- Hours: 42
- Credits: 3
- Pre-Requisites: CONS1170 OR CONS1175
- CoRequisites:
Estimating III
CONS3035
- Hours: 42
- Credits: 3
- Pre-Requisites: CONS3020
- CoRequisites:
Building Services III
CONS3040
This course initially introduces the students to Site Servicing and how the building is serviced. Students will examine Building Systems such as water supply, DWV (drain/waste/Vent) components and design fundamentals using Part 7 of the Ontario Building Code. Requirements and calculations for storm water drainage is also analyzed. Plumbing Design considerations and sample designs are carried out for commercial buildings. Elevator systems are introduced in the context of options available.
- Hours: 42
- Credits: 3
- Pre-Requisites: CONS2030
- CoRequisites:
Electrical Design I
ELEC3105
This course initially investigates electrical power from generation to utilization (building systems). The student is introduced to the basics of electrical theory and its laws such as, Ohm's Law and Kirchhoff's Laws. Practical applications of this theory are applied to conductors, resistors (loads), series circuits, parallel circuits and series-parallel circuits. A basic familiarization of the Canadian Electrical Code (CEC) is practised. Students will calculate service sizing for residential and non-residential buildings and occupancies. Various applications of conductors, cables, conduits and raceways are discussed relative to pertinent code rules. Grounding and bonding requirements are discussed with respect to safety and the CEC. Students will complete an electrical design package (power distribution and general power) for a commercial building.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 6
Course details
Team Project Documentation
ARCH3045
In this course the student works as part of a team to develop a set of construction documents for a project designed in Architectural Team Design. The student must cooperate in the production of Architectural and Structural construction drawings as well as engineering notes and an outline specification for the project.
- Hours: 56
- Credits: 4
- Pre-Requisites: ARCH3020 AND ARCH3030 OR ARCH3035
- CoRequisites:
Building Environment Design
ARCH3070
HVAC systems and associated design principles are applied to the building industry, with special attention to sustainable development strategies. Large central station air-conditioning systems and their individual components are examined with respect to suitability, performance and related energy criteria, including air stream mixing for dehumidification, cooling and ventilation. Hot water heating systems (hydronic) are analyzed and designs completed for typical buildings. Geothermal heat pumps and closed-loop, water source commercial heat pump systems are designed for specific building applications along with representative capital and operating costs.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Structural Design (Wood)
CIVL2150
- Hours: 42
- Credits: 3
- Pre-Requisites: CIVL1080 OR CIVL1110 AND CIVL2130 OR CIVL2135
- CoRequisites:
Contracts And Specifications
CONS2020
This is an introduction to contract law and a detailed analysis of the function of written specifications as part of contract documents. Students will gain experience using project specifications to extract and record construction information.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Construction Management
CONS3050
This course introduces students to the separate roles of Construction Management. Students will examine the roles and responsibilities of a Construction Manager, Site Superintendent & Estimator. Topics will include planning, scheduling, budgeting, and control of construction projects. Soft skills related to effective leadership, communication and negotiation will be emphasized. Students will examine the Occupational Health & Safety Act and Regulation 213/91 Construction Projects
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Electrical Design II
ELEC3110
- Hours: 42
- Credits: 3
- Pre-Requisites: ELEC3100 OR ELEC3105
- CoRequisites: ARCH3040 OR ARCH3045
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 1
Course details
Principles of Architectural Graphics and Design
ARCH1100
This course introduces the student to the architectural graphic conventions employed in the production of design and construction drawings and discusses the student's role of the Designer in society. It leads the student through the process of understanding construction drawings, design problem solving, effective development and communication of a design idea, and recognition the built environment has on society. As a vehicle of learning, various drawing exercises as well as a small scale residential oriented architectural design problem will be the focus.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Building Information Modeling I
ARCH1185
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Statics
CIVL1080
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Conestoga 101
CON0101
- Hours: 1
- Credits: 0
- Pre-Requisites:
- CoRequisites:
Construction Materials I
CONS1860
The course is an introduction to some of the basic materials and techniques that are used in the construction of buildings. There is also a strong construction site safety component. Students will learn about earthworks, concrete, masonry & steel and will be introduced to foundation and shoring systems, beams, columns, and floor systems.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Mathematics I
MATH1085
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Surveying I
SURV1020
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Level 2
Course details
Construction Drawings (Residential)
ARCH2035
In this course the student is introduced to light wood frame construction by exploring construction techniques for a single family residential house. Each student will produce a partial set of Construction Drawings for a single family house from a specific presentation design provided.
- Hours: 56
- Credits: 4
- Pre-Requisites: ARCH1100 AND ARCH1185
- CoRequisites:
Building Information Modeling II
ARCH2105
- Hours: 42
- Credits: 3
- Pre-Requisites: ARCH1185
- CoRequisites:
Co-op and Career Preparation
CEPR1020
- Hours: 14
- Credits: 1
- Pre-Requisites:
- CoRequisites:
Mechanics of Materials
CIVL2135
This course introduces the concept of mechanical stress and strain in materials. Students utilize the theory of mechanics to determine the stress and strain caused by load, failure capacities and deformations of axially loaded structural elements and bending members. The mechanical behaviour of materials, material failure mechanisms and structural stability are explored with consideration of Limit States Design.
- Hours: 42
- Credits: 3
- Pre-Requisites: CIVL1080 OR CIVL1110 OR PHYS1041
- CoRequisites:
Building Code I
CODE1130
This course introduces students to the Laws and Regulations governing the construction of buildings in Ontario. Students will explore the legal requirements contained in the Building Code Act as well as the intent, organization, and application of the Ontario Building Code. Emphasis is given to the roles and responsibilities of design and construction professionals as well as understanding the building permit process (application requirements, plan review and site inspections). The course will also introduce students to the technical construction and energy efficiency requirements in the Ontario Building Code for new houses (Parts 9 and 12 of Division B). Students will become competent in the use and application of the Ontario Building Code by analyzing house drawings for code compliance.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
College Reading & Writing Skills
COMM1085
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Construction Materials II
CONS1870
The course is a continuation of Construction Materials 1. Students will continue to be introduced to basic materials and more advanced techniques that are used in the construction of buildings. The focus is on advanced footing systems, concrete, structural steel, masonry, wall cladding, low slope roofing, openings, fire & sound separations.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Mathematics II (Construction)
MATH1140
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Level 3
Course details
Co-op Work Term I (Construction)
COOP1070
- Hours: 420
- Credits: 14
- Pre-Requisites: CDEV1020 OR CEPR1020
- CoRequisites:
Level 4
Course details
Construction Drawings (Small Commercial)
ARCH1030
- Hours: 42
- Credits: 3
- Pre-Requisites: ARCH2030 OR ARCH2035
- CoRequisites:
Architectural Design I
ARCH2040
- Hours: 42
- Credits: 3
- Pre-Requisites: ARCH1100 AND ARCH1185
- CoRequisites: ARCH1030
Structural Design (Steel)
CIVL2200
- Hours: 42
- Credits: 3
- Pre-Requisites: CIVL1080 OR CIVL1110 AND CIVL2130 OR CIVL2135
- CoRequisites:
Building Code II
CODE2050
This course focuses on the technical construction and energy efficiency requirements in the Ontario Building Code for new small commercial buildings (Parts 9 and 12 of Division B). Students will be introduced to principles of fire and life safety commonly incorporated into single and multi-use commercial buildings. Emphasis is given to passive fire protection, spatial separation, egress and exiting in buildings. This course will also introduce students to mezzanine, health/washroom, and barrier-free requirements that are applicable to both small and large buildings. Students will become competent in the use and application of the Ontario Building Code by analyzing small commercial drawings for code compliance.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Building Science
CONS1175
This course explores concepts in physics utilized in the construction industry and introduces the student into the field of Building Sciences. The student is further introduced to specific studies of the building enclosure, psychrometrics, heat transfer, fire, and sound and building science . These topics form the basis for later technical study in the program. Emphasis is placed on integrating the knowledge of physical scientific concepts with their application to practical construction problems and to applicable building code requirements.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Building Services I
CONS2040
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Estimating I
CONS2050
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Level 5
Course details
Construction Drawings (Multi-Use)
ARCH2050
This course is designed to familiarize the student with the nature of light industrial construction utilizing a structural steel skeleton with an insulated steel wall assembly. The student will take the design developed in the Architectural Design I course and develop the building systems and details required to construct the building on a specific site. The student will organize this information and present it in clear and concise manner in the form of a set of construction drawings.
- Hours: 42
- Credits: 3
- Pre-Requisites: ARCH1030 AND ARCH2040
- CoRequisites:
Building Information Modeling III
ARCH2120
This course will enhance the student’s knowledge of Building Information Modeling by introducing more advanced modeling techniques including the creation and management of component families, advanced schedules, shared parameters, and solid modeling. In addition, the student will explore the design and placement of mechanical and electrical systems in a 3-dimensional building model.
- Hours: 42
- Credits: 3
- Pre-Requisites: ARCH1185
- CoRequisites:
Structural Design (Concrete)
CIVL2190
- Hours: 56
- Credits: 4
- Pre-Requisites: CIVL1080 OR CIVL1110 AND CIVL2130 OR CIVL2135
- CoRequisites:
Building Code III
CODE2060
This course focuses on the technical construction and energy efficiency requirements in the Ontario Building Code for new large commercial and multi-residential buildings (Parts 3 and 12 of Division B). Students will be introduced to the unique and challenging fire and life safety concerns found in larger, taller, and more complex buildings. Emphasis is given to advanced active fire protection systems such as fire alarms, automatic sprinkler systems, standpipe systems, and smoke control systems. This course will also introduce students to the technical requirements for a change of use or renovation in an existing building (Parts 10 and 11 of Division B). Students will become competent in the use and application of the Ontario Building Code by analyzing large multi-residential drawings and renovation drawings for code compliance.
- Hours: 56
- Credits: 4
- Pre-Requisites: CODE2050
- CoRequisites:
Building Services II
CONS2030
- Hours: 42
- Credits: 3
- Pre-Requisites: CONS2040
- CoRequisites:
Estimating II
CONS3020
This course builds upon skills learned in Estimating I.
The student will participate as a team member, while using Bluebeam and Excel software to complete a detailed cost estimate for masonry and rough carpentry work, relevant to a commercial building project.
Students will apply pricing for material, labour & equipment, specific to masonry and rough carpentry work product.
Students will learn to manipulate units of material pricing and to develop labour unit pricing.
- Hours: 28
- Credits: 2
- Pre-Requisites: CONS2050
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 6
Course details
Co-op Work Term II (Construction)
COOP2060
- Hours: 420
- Credits: 14
- Pre-Requisites: CDEV1020 OR CEPR1020
- CoRequisites:
Level 7
Course details
Construction Drawings (Detailing and Analysis)
ARCH3020
- Hours: 42
- Credits: 3
- Pre-Requisites: ARCH2050
- CoRequisites:
Architectural Team Design
ARCH3035
- Hours: 56
- Credits: 4
- Pre-Requisites: ARCH1185 AND ARCH2040 AND ARCH2050
- CoRequisites: ARCH3020
Building Performance Studies
ARCH3050
- Hours: 42
- Credits: 3
- Pre-Requisites: CONS1170 OR CONS1175
- CoRequisites:
Estimating III
CONS3035
- Hours: 42
- Credits: 3
- Pre-Requisites: CONS3020
- CoRequisites:
Building Services III
CONS3040
This course initially introduces the students to Site Servicing and how the building is serviced. Students will examine Building Systems such as water supply, DWV (drain/waste/Vent) components and design fundamentals using Part 7 of the Ontario Building Code. Requirements and calculations for storm water drainage is also analyzed. Plumbing Design considerations and sample designs are carried out for commercial buildings. Elevator systems are introduced in the context of options available.
- Hours: 42
- Credits: 3
- Pre-Requisites: CONS2030
- CoRequisites:
Electrical Design I
ELEC3105
This course initially investigates electrical power from generation to utilization (building systems). The student is introduced to the basics of electrical theory and its laws such as, Ohm's Law and Kirchhoff's Laws. Practical applications of this theory are applied to conductors, resistors (loads), series circuits, parallel circuits and series-parallel circuits. A basic familiarization of the Canadian Electrical Code (CEC) is practised. Students will calculate service sizing for residential and non-residential buildings and occupancies. Various applications of conductors, cables, conduits and raceways are discussed relative to pertinent code rules. Grounding and bonding requirements are discussed with respect to safety and the CEC. Students will complete an electrical design package (power distribution and general power) for a commercial building.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 8
Course details
Team Project Documentation
ARCH3045
In this course the student works as part of a team to develop a set of construction documents for a project designed in Architectural Team Design. The student must cooperate in the production of Architectural and Structural construction drawings as well as engineering notes and an outline specification for the project.
- Hours: 56
- Credits: 4
- Pre-Requisites: ARCH3020 AND ARCH3030 OR ARCH3035
- CoRequisites:
Building Environment Design
ARCH3070
HVAC systems and associated design principles are applied to the building industry, with special attention to sustainable development strategies. Large central station air-conditioning systems and their individual components are examined with respect to suitability, performance and related energy criteria, including air stream mixing for dehumidification, cooling and ventilation. Hot water heating systems (hydronic) are analyzed and designs completed for typical buildings. Geothermal heat pumps and closed-loop, water source commercial heat pump systems are designed for specific building applications along with representative capital and operating costs.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Structural Design (Wood)
CIVL2150
- Hours: 42
- Credits: 3
- Pre-Requisites: CIVL1080 OR CIVL1110 AND CIVL2130 OR CIVL2135
- CoRequisites:
Contracts And Specifications
CONS2020
This is an introduction to contract law and a detailed analysis of the function of written specifications as part of contract documents. Students will gain experience using project specifications to extract and record construction information.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Construction Management
CONS3050
This course introduces students to the separate roles of Construction Management. Students will examine the roles and responsibilities of a Construction Manager, Site Superintendent & Estimator. Topics will include planning, scheduling, budgeting, and control of construction projects. Soft skills related to effective leadership, communication and negotiation will be emphasized. Students will examine the Occupational Health & Safety Act and Regulation 213/91 Construction Projects
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Electrical Design II
ELEC3110
- Hours: 42
- Credits: 3
- Pre-Requisites: ELEC3100 OR ELEC3105
- CoRequisites: ARCH3040 OR ARCH3045
Student must pass 1 Course(s), selected in the Student Portal from available course options
Program outcomes
- Develop and use strategies to enhance professional growth and ongoing learning in the construction engineering field.
- Comply with workplace health and safety practices and procedures in accordance with current legislation and regulations.
- Complete duties and assist in monitoring that work is performed in compliance with contractual obligations, applicable laws, standards, bylaws, codes and ethical practices in the construction engineering field.
- Promote and carry out sustainability practices in accordance with contract documents, industry standards and environmental legislative requirements.
- Facilitate the collaboration and interaction among project stakeholders to support construction engineering projects.
- Collect, process, analyze and coordinate technical data to produce written and graphical project-related documents.
- Coordinate and facilitate the collecting, processing, interpreting and application of survey/geomatics and layout information to implement construction projects.
- Select and use industry-specific electronic and digital technologies to support the design and construction of projects.
- Analyze and solve technical problems related to the design and implementation of construction projects by applying engineering concepts, technical, mathematics and building science.
- Schedule, coordinate and monitor the progression of construction projects by applying principles of construction project management.
- Prepare estimates of time, cost, quality and quantity, tenders and bids.
- Perform, coordinate and facilitate quality control testing and monitoring of equipment, materials and methods involved in the implementation and
completion of construction projects.
- Apply teamwork, leadership, supervision and interpersonal skills when working individually or within multidisciplinary teams to complete work on construction projects.