Applying as a Canadian applicant
Domestic students should apply online or by phone at 1-888-892-2228.
Applying as an International applicant
Campus tours
Campus tours are one of the best ways to experience Conestoga. During this time, we are offering online guided tours to show you all Conestoga has to offer.
Book your tourVirtual tours
If you can't make an on-campus tour or attend one of our events, the virtual tour is a great way to visit us.
View our Virtual tourCourses - September 2024
Level 1
Course details
College Reading & Writing Skills
COMM1085
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Excel for Engineering Technology
COMP1347
- Hours: 14
- Credits: 1
- Pre-Requisites:
- CoRequisites:
Conestoga 101
CON0101
- Hours: 1
- Credits: 0
- Pre-Requisites:
- CoRequisites:
Electrical Fundamentals
EECE1475
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Mathematics I
MATH1085
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Engineering Drawing I
MECH1050
In this course, both freehand drawing and computer-aided drawing techniques (using AutoCAD) are used to introduce the student to Mechanical Engineering drawings. The material covered will include orthographic representations and projection, auxiliary views, sections, dimensioning and isometric drawing. During the course, the student will create detail, working, and assembly drawings conforming to CSA/ANSI standards.
- Hours: 84
- Credits: 6
- Pre-Requisites:
- CoRequisites:
Engineering Materials
MECH1130
- Hours: 70
- Credits: 5
- Pre-Requisites:
- CoRequisites:
Introduction to Structured Programming
PROG1125
This introductory course will enable students to learn computer software fundamentals via a hands-on approach to writing computer programs in Microsoft Windows environments. The course will cover techniques such as: user interfaces, event handling, data storage, data manipulation, decision making, code repetition, and data structures. Students will employ a variety of strategies as they develop and troubleshoot their programs
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Level 2
Course details
Introduction to Geometric Dimensioning and Tolerancing
DRWG1405
- Hours: 28
- Credits: 2
- Pre-Requisites: MECH1050
- CoRequisites:
Introduction to Fluid Power and Automation
IFME1020
This course introduces the students to the field of industrial fluid power and control. Students will learn fluid power terminology, component sizing and selection methods, circuit design and documentation. Students will understand the fundamental principles as well as the practical applications of fluid power as it applies to industry. In the lab, students are required to design and build a variety of circuits using a combination of hydraulic, pneumatic and electrical components. The hands-on approach provides an excellent learning environment with a significant focus on trouble-shooting and problem solving.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Conventional Machining Processes
MACH1010
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Mathematics II
MATH1195
- Hours: 42
- Credits: 3
- Pre-Requisites: MATH1085
- CoRequisites:
Engineering Drawing II
MECH1065
- Hours: 56
- Credits: 4
- Pre-Requisites: MECH1050
- CoRequisites:
Applied Mechanics
MECH1220
- Hours: 70
- Credits: 5
- Pre-Requisites: MATH1085
- CoRequisites:
PLC and HMI Programming
PROG1095
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 3
Course details
Advanced Solid Modeling
DRWG2220
- Hours: 42
- Credits: 3
- Pre-Requisites: MECH1065
- CoRequisites:
Design of Jigs and Fixtures
DSGN2100
When successfully completed, the learner will be able to understand the concept and operating principles of Jigs and Fixtures. The student will evaluate the efficient method of machining a workpiece in correct sequence to obtain proper surface and geometric relationships. The student will be able to utilize various locational, clamping, indexing and tool guiding devices as used on Jigs and Fixtures, for the successful design of metal machining, fabricating and component inspection operations. The student will be able to recognize and utilize materials and standard catalogued components to create efficient Jig and Fixture designs. The student will evaluate the benefits of additive manufacturing, how it can save time and money for inspection, assembly and other jigs and fixtures.
- Hours: 56
- Credits: 4
- Pre-Requisites: MECH1065
- CoRequisites:
Design for Manufacturing and Assembly
DSGN2290
- Hours: 42
- Credits: 3
- Pre-Requisites: MECH1065
- CoRequisites:
Manufacturing Processes
MANU2070
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
CNC Programming/2DMasterCAM
MECH2010
- Hours: 56
- Credits: 4
- Pre-Requisites: MACH1010
- CoRequisites:
Mechanics of Materials
MECH2030
- Hours: 56
- Credits: 4
- Pre-Requisites: MECH1130 AND MECH1220
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 4
Course details
Dimensional Metrology and Coordinate Measuring Machines
DIMM2010
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Additive and Advanced Manufacturing
MANU2060
- Hours: 42
- Credits: 3
- Pre-Requisites: MECH1065
- CoRequisites:
Tool and Die Design
MECH2050
- Hours: 56
- Credits: 4
- Pre-Requisites: DSGN2100
- CoRequisites:
CNC Graphics and MasterCAM 3D
MECH2060
- Hours: 56
- Credits: 4
- Pre-Requisites: MECH2010
- CoRequisites:
Quality Assurance and Systems
QUAL2010
- Hours: 42
- Credits: 3
- Pre-Requisites: MATH1085
- CoRequisites:
Introduction to Robotics
ROBO2010
- Hours: 56
- Credits: 4
- Pre-Requisites: PROG1125 OR PROG1395 OR PROG2170
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 1
Course details
College Reading & Writing Skills
COMM1085
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Excel for Engineering Technology
COMP1347
- Hours: 14
- Credits: 1
- Pre-Requisites:
- CoRequisites:
Conestoga 101
CON0101
- Hours: 1
- Credits: 0
- Pre-Requisites:
- CoRequisites:
Electrical Fundamentals
EECE1475
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Mathematics I
MATH1085
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Engineering Drawing I
MECH1050
In this course, both freehand drawing and computer-aided drawing techniques (using AutoCAD) are used to introduce the student to Mechanical Engineering drawings. The material covered will include orthographic representations and projection, auxiliary views, sections, dimensioning and isometric drawing. During the course, the student will create detail, working, and assembly drawings conforming to CSA/ANSI standards.
- Hours: 84
- Credits: 6
- Pre-Requisites:
- CoRequisites:
Engineering Materials
MECH1130
- Hours: 70
- Credits: 5
- Pre-Requisites:
- CoRequisites:
Introduction to Structured Programming
PROG1125
This introductory course will enable students to learn computer software fundamentals via a hands-on approach to writing computer programs in Microsoft Windows environments. The course will cover techniques such as: user interfaces, event handling, data storage, data manipulation, decision making, code repetition, and data structures. Students will employ a variety of strategies as they develop and troubleshoot their programs
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Level 2
Course details
Co-op and Career Preparation
CEPR1020
- Hours: 14
- Credits: 1
- Pre-Requisites:
- CoRequisites:
Introduction to Geometric Dimensioning and Tolerancing
DRWG1405
- Hours: 28
- Credits: 2
- Pre-Requisites: MECH1050
- CoRequisites:
Introduction to Fluid Power and Automation
IFME1020
This course introduces the students to the field of industrial fluid power and control. Students will learn fluid power terminology, component sizing and selection methods, circuit design and documentation. Students will understand the fundamental principles as well as the practical applications of fluid power as it applies to industry. In the lab, students are required to design and build a variety of circuits using a combination of hydraulic, pneumatic and electrical components. The hands-on approach provides an excellent learning environment with a significant focus on trouble-shooting and problem solving.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Conventional Machining Processes
MACH1010
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Mathematics II
MATH1195
- Hours: 42
- Credits: 3
- Pre-Requisites: MATH1085
- CoRequisites:
Engineering Drawing II
MECH1065
- Hours: 56
- Credits: 4
- Pre-Requisites: MECH1050
- CoRequisites:
Applied Mechanics
MECH1220
- Hours: 70
- Credits: 5
- Pre-Requisites: MATH1085
- CoRequisites:
PLC and HMI Programming
PROG1095
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 3
Course details
Co-op Work Term I (Automated Manufacturing - Technician)
COOP1410
- Hours: 420
- Credits: 14
- Pre-Requisites: CDEV1020 OR CEPR1020
- CoRequisites:
Level 4
Course details
Advanced Solid Modeling
DRWG2220
- Hours: 42
- Credits: 3
- Pre-Requisites: MECH1065
- CoRequisites:
Design of Jigs and Fixtures
DSGN2100
When successfully completed, the learner will be able to understand the concept and operating principles of Jigs and Fixtures. The student will evaluate the efficient method of machining a workpiece in correct sequence to obtain proper surface and geometric relationships. The student will be able to utilize various locational, clamping, indexing and tool guiding devices as used on Jigs and Fixtures, for the successful design of metal machining, fabricating and component inspection operations. The student will be able to recognize and utilize materials and standard catalogued components to create efficient Jig and Fixture designs. The student will evaluate the benefits of additive manufacturing, how it can save time and money for inspection, assembly and other jigs and fixtures.
- Hours: 56
- Credits: 4
- Pre-Requisites: MECH1065
- CoRequisites:
Design for Manufacturing and Assembly
DSGN2290
- Hours: 42
- Credits: 3
- Pre-Requisites: MECH1065
- CoRequisites:
Manufacturing Processes
MANU2070
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
CNC Programming/2DMasterCAM
MECH2010
- Hours: 56
- Credits: 4
- Pre-Requisites: MACH1010
- CoRequisites:
Mechanics of Materials
MECH2030
- Hours: 56
- Credits: 4
- Pre-Requisites: MECH1130 AND MECH1220
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 5
Course details
Co-op Work Term II (Automated Manufacturing - Technician)
COOP2410
- Hours: 420
- Credits: 14
- Pre-Requisites: CDEV1020 OR CEPR1020
- CoRequisites:
Level 6
Course details
Dimensional Metrology and Coordinate Measuring Machines
DIMM2010
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Additive and Advanced Manufacturing
MANU2060
- Hours: 42
- Credits: 3
- Pre-Requisites: MECH1065
- CoRequisites:
Tool and Die Design
MECH2050
- Hours: 56
- Credits: 4
- Pre-Requisites: DSGN2100
- CoRequisites:
CNC Graphics and MasterCAM 3D
MECH2060
- Hours: 56
- Credits: 4
- Pre-Requisites: MECH2010
- CoRequisites:
Quality Assurance and Systems
QUAL2010
- Hours: 42
- Credits: 3
- Pre-Requisites: MATH1085
- CoRequisites:
Introduction to Robotics
ROBO2010
- Hours: 56
- Credits: 4
- Pre-Requisites: PROG1125 OR PROG1395 OR PROG2170
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Program outcomes
- Complete all work in compliance with current legislation, standards, regulations and guidelines.
- Apply quality control and quality assurance procedures to meet organizational standards and requirements.
- Comply with current health and safety legislation, as well as organizational practices and procedures.
- Apply sustainability* best practices in workplaces.
- Use current and emerging technologies* to support the implementation of mechanical and manufacturing projects.
- Analyze and solve mechanical problems by applying mathematics and fundamentals of mechanics.
- Interpret, prepare and modify mechanical drawings and other related technical documents.
- Perform technical measurements accurately using appropriate instruments and equipment.
- Manufacture, assemble, maintain and repair mechanical components according to required specifications.
- Contribute to the planning, implementation and evaluation of projects.
- Apply manual, CNC, and computer-aided manufacturing techniques in planning and controlling manufacturing systems.