Applying as a Canadian applicant
Domestic students should apply online or by phone at 1-888-892-2228.
Applying as an International applicant
Campus tours
Campus tours are one of the best ways to experience Conestoga. During this time, we are offering online guided tours to show you all Conestoga has to offer.
Book your tourVirtual tours
If you can't make an on-campus tour or attend one of our events, the virtual tour is a great way to visit us.
View our Virtual tourCourses - September 2024
Level 1
Course details
College Reading & Writing Skills
COMM1085
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Computer Applications
COMP1280
This course will introduce students to the use of word processing and spreadsheet software, as well as, operating systems and the Web to produce technical documents.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Conestoga 101
CON0101
- Hours: 1
- Credits: 0
- Pre-Requisites:
- CoRequisites:
Applied Mathematics
MATH1830
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Introduction to Heavy Equipment Service and Repair
MOTV1107
- Hours: 154
- Credits: 8
- Pre-Requisites:
- CoRequisites:
Drawings, Schematics and Basic Electricity
MOTV1215
This course will introduce the student to the basic electrical theory, electrical laws and test equipment.
- Hours: 14
- Credits: 1
- Pre-Requisites:
- CoRequisites:
Trade and Repair Practices
TRCK1715
In this course, students will cover fastening devices, bearings, seals and sealants and the use of precision measuring tools.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Welding for Motive Power
WELD1610
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Level 2
Course details
Career Launch
CDEV1820
- Hours: 14
- Credits: 1
- Pre-Requisites:
- CoRequisites:
Motive Power Business I
MOTV2205
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Fluid Power Systems
TRCK1140
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Fuel Systems I
TRCK1270
In this course, students will describe the fundamentals of diesel fuel, inspect engine fuel systems, recommend repairs to diesel fuel sub-systems and injectors using OEM recommendations and procedures.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Engine Systems I
TRCK1280
In this course the student will demonstrate a basic knowledge of the construction, engine types and components, operating principles, testing and servicing of diesel combustion engine assemblies, cylinder heads and valve trains, lubrication systems, cooling systems, intake and exhaust systems.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Drive Train Systems
TRCK1360
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Brake Systems
TRCK1560
In this course the student will perform adjustments and repairs to wheel end assemblies, recommend repairs to hydraulic brake systems, and perform repairs to air brake systems following manufacturers' recommendations and statutory criteria.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Electrical Systems I
TRCK1740
In this course students will demonstrate fundamental knowledge of the principles of electrical theory and laws, and use of electrical test equipment. Students will also demonstrate an ability to trace, test and repair electrical circuits and components, know the fundamental operating principles of electromagnetic devices, and how to test and service batteries.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 3
Course details
Engine Systems for Heavy Duty Equipment
MOTV2185
- Hours: 42
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Motive Power Business II
MOTV2265
- Hours: 56
- Credits: 4
- Pre-Requisites: MOTV2205
- CoRequisites:
Motive Power Shop Management
MOTV2285
In this course the student will study proper shop documentation, repair orders, service reports, warranty claims and equipment maintenance responsibilities. This can include pay structures, customer retention, waste management and recall notices. Shop organization and reporting structure of different types of businesses will also be studied.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Trade Practices for Heavy Duty Equipment
MOTV2375
This course will prepare the student to utilize oxy-fuel heating and cutting equipment, test and repair heating and ventilation systems, test and repair air conditioning systems, and also identify operator protection devices.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Fuel Systems for Heavy Duty Equipment
MOTV2385
- Hours: 42
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Fluid Power for Heavy Duty Equipment
MOTV2400
In this course students will learn to interpret schematics and perform pressure, force, and area calculations related to hydraulics. Students will also be able to explain the service procedures of hydraulic fluids, reservoirs, and conditioners, replace hydraulic lines and fittings, and recommend repairs of hydraulic control valves and hydraulic pumps following manufacturers’ recommendations and service information.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Steering, Tires & Brake Systems for Heavy Duty Equipment
MOTV2420
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 4
Course details
Drive Train Systems for Heavy Duty Equipment
MOTV2195
In this course students will perform repair procedures for drive systems, in addition to testing and repair procedures for power shift transmissions, following manufacturers' recommendations and following safe work practices.
- Hours: 42
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Failure Analysis
MOTV2215
This course will examine the causes of engine failure. The student will demonstrate analytical skills to determine the reasons for engine failure by examining wear factors, oil analysis and macroscopic/microscopic examination and failed components.
- Hours: 42
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Electrical Diagnostics and Repair
MOTV2221
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Legal Issues in Motive Power
MOTV2250
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Parts Management
MOTV2305
In this course students will analyze point of purchase transactions including Vehicle Identification Number (VIN) decoding and parts lookup, inventory control procedures, billing and account setups; in addition to parts delivery, core charges and return processes. Students will also examine independent and dealership models including trade and retail accounts.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Fuels and Diagnostics
MOTV2450
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 1
Course details
College Reading & Writing Skills
COMM1085
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Computer Applications
COMP1280
This course will introduce students to the use of word processing and spreadsheet software, as well as, operating systems and the Web to produce technical documents.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Conestoga 101
CON0101
- Hours: 1
- Credits: 0
- Pre-Requisites:
- CoRequisites:
Applied Mathematics
MATH1830
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Introduction to Heavy Equipment Service and Repair
MOTV1107
- Hours: 154
- Credits: 8
- Pre-Requisites:
- CoRequisites:
Drawings, Schematics and Basic Electricity
MOTV1215
This course will introduce the student to the basic electrical theory, electrical laws and test equipment.
- Hours: 14
- Credits: 1
- Pre-Requisites:
- CoRequisites:
Trade and Repair Practices
TRCK1715
In this course, students will cover fastening devices, bearings, seals and sealants and the use of precision measuring tools.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Welding for Motive Power
WELD1610
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Level 2
Course details
Career Launch
CDEV1820
- Hours: 14
- Credits: 1
- Pre-Requisites:
- CoRequisites:
Co-op and Career Preparation
CEPR1020
- Hours: 14
- Credits: 1
- Pre-Requisites:
- CoRequisites:
Motive Power Business I
MOTV2205
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Fluid Power Systems
TRCK1140
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Fuel Systems I
TRCK1270
In this course, students will describe the fundamentals of diesel fuel, inspect engine fuel systems, recommend repairs to diesel fuel sub-systems and injectors using OEM recommendations and procedures.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Engine Systems I
TRCK1280
In this course the student will demonstrate a basic knowledge of the construction, engine types and components, operating principles, testing and servicing of diesel combustion engine assemblies, cylinder heads and valve trains, lubrication systems, cooling systems, intake and exhaust systems.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Drive Train Systems
TRCK1360
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Brake Systems
TRCK1560
In this course the student will perform adjustments and repairs to wheel end assemblies, recommend repairs to hydraulic brake systems, and perform repairs to air brake systems following manufacturers' recommendations and statutory criteria.
- Hours: 42
- Credits: 3
- Pre-Requisites:
- CoRequisites:
Electrical Systems I
TRCK1740
In this course students will demonstrate fundamental knowledge of the principles of electrical theory and laws, and use of electrical test equipment. Students will also demonstrate an ability to trace, test and repair electrical circuits and components, know the fundamental operating principles of electromagnetic devices, and how to test and service batteries.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 3
Course details
Co-op Work Term (Motive Power Technician - Heavy Duty Equipment)
COOP2500
- Hours: 420
- Credits: 14
- Pre-Requisites: CEPR1020
- CoRequisites:
Level 4
Course details
Engine Systems for Heavy Duty Equipment
MOTV2185
- Hours: 42
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Motive Power Business II
MOTV2265
- Hours: 56
- Credits: 4
- Pre-Requisites: MOTV2205
- CoRequisites:
Motive Power Shop Management
MOTV2285
In this course the student will study proper shop documentation, repair orders, service reports, warranty claims and equipment maintenance responsibilities. This can include pay structures, customer retention, waste management and recall notices. Shop organization and reporting structure of different types of businesses will also be studied.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Trade Practices for Heavy Duty Equipment
MOTV2375
This course will prepare the student to utilize oxy-fuel heating and cutting equipment, test and repair heating and ventilation systems, test and repair air conditioning systems, and also identify operator protection devices.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Fuel Systems for Heavy Duty Equipment
MOTV2385
- Hours: 42
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Fluid Power for Heavy Duty Equipment
MOTV2400
In this course students will learn to interpret schematics and perform pressure, force, and area calculations related to hydraulics. Students will also be able to explain the service procedures of hydraulic fluids, reservoirs, and conditioners, replace hydraulic lines and fittings, and recommend repairs of hydraulic control valves and hydraulic pumps following manufacturers’ recommendations and service information.
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Steering, Tires & Brake Systems for Heavy Duty Equipment
MOTV2420
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Level 5
Course details
Drive Train Systems for Heavy Duty Equipment
MOTV2195
In this course students will perform repair procedures for drive systems, in addition to testing and repair procedures for power shift transmissions, following manufacturers' recommendations and following safe work practices.
- Hours: 42
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Failure Analysis
MOTV2215
This course will examine the causes of engine failure. The student will demonstrate analytical skills to determine the reasons for engine failure by examining wear factors, oil analysis and macroscopic/microscopic examination and failed components.
- Hours: 42
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Electrical Diagnostics and Repair
MOTV2221
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Legal Issues in Motive Power
MOTV2250
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Parts Management
MOTV2305
In this course students will analyze point of purchase transactions including Vehicle Identification Number (VIN) decoding and parts lookup, inventory control procedures, billing and account setups; in addition to parts delivery, core charges and return processes. Students will also examine independent and dealership models including trade and retail accounts.
- Hours: 28
- Credits: 2
- Pre-Requisites:
- CoRequisites:
Fuels and Diagnostics
MOTV2450
- Hours: 56
- Credits: 4
- Pre-Requisites:
- CoRequisites:
Student must pass 1 Course(s), selected in the Student Portal from available course options
Program outcomes
- Analyse, diagnose, and solve various motive power system problems by using problem-solving and critical thinking skills and strategies and by applying fundamental knowledge of motor vehicle operation, components, and their interrelationships.
- Diagnose and repair climate control systems in compliance with manufacturers’ recommendations.
- Diagnose and repair engine systems in compliance with manufacturers’ recommendations.
- Diagnose and repair electrical, electronic, personal safety, and emission components and systems in compliance with manufacturers’ recommendations.
- Diagnose and repair drive train components and systems in compliance with manufacturers’ recommendations.
- Diagnose and repair suspension, steering, and brake components and systems in compliance with manufacturers’ recommendations.
- Disassemble and assemble components to required specifications by applying workshop skills and knowledge of basic shop practices.
- Select and use a variety of troubleshooting techniques and test equipment to assess electronic circuits, vehicle systems, and subsystems.
- Apply knowledge of hydraulics and pneumatics to the testing and analysis of motive power systems and subsystems.
- Communicate information effectively, credibly, and accurately by producing supporting documentation to appropriate standards.
- Use information technology and computer skills to support work in a motive power environment.
- Prepare, support, maintain, and communicate data from log, record, and documentation systems.
- Apply business practices, project management skills, and communication skills to improve customer service.
- Assist in quality-control and quality-assurance programs and procedures.
- Develop and use personal and professional strategies and plans to improve professional growth, job performance, and work relationships.
- Complete all assigned work in compliance with occupational, health, safety, and environmental law; established policies and procedures; codes and regulations; and in accordance with ethical principles.